-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Nate figlar wrote: > hello folks, > > I Just upgraded the soundcard(old one was a m-audio revolution 7.1) in > my x86-64 system to a hammerfall 9652 HDSP pci card. everything works > great except on playback the 2 rca jacks produce no sound whatsoever. > according to the manual there should be sound through those jacks > continuously but I do know that the manual is for windows or mac > systems. I am seeing sound output in the master channel in ardour that > I have connected to all outputs on the hammerfall and also tried just > the 2 rca jacks. I also see the meter in the HDSP mixer program show > signal as well. I have even tried using different settings (just > about ever combination I can think of) in the HDSP configuration > program with no luck. Anyone have any suggestions? > I will have to check later, but I don't my 9652 had any output jacks other than the light-pipe ones. I have mine connected to a ADI-8 DS and an 8 track Alesis XT (ADAT). In my jack mixer I connect the left and right output to output 1 and 2 on the ADI-8. I connect my headhones or monitors to these ports to get sound.
I will try to remember to take some screen shots after work tomorrow. Cheers, -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAknMe0wACgkQwRXgH3rKGfNniACgkUdIo4K+XI/kTdJgt0rlZ0uz /0IAn0tMSJAIxXBbIXhsC0yjveL7RuXt =NSFy -----END PGP SIGNATURE----- _______________________________________________ 64studio-users mailing list [email protected] http://lists.64studio.com/mailman/listinfo/64studio-users
