HI All
Seem to have developed a problem with my M-Audio card, like it isn't there!
Jack is now not showing it at all. Do these cards just fail?.
Here is my pci stuff:
*************************************************
00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev
a2)
Subsystem: Hewlett-Packard Company Unknown device 2a6c
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at fe024000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+
Queue=0/0 Enable-
Capabilities: [6c] HyperTransport: MSI Mapping
01:05.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70) (prog-if 10
[OHCI])
Subsystem: Hewlett-Packard Company Unknown device 2a6c
Flags: bus master, medium devsel, latency 32, IRQ 19
Memory at fdeff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
01:0a.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24]
PCI Multi-Channel I/O Controller (rev 02)
Subsystem: VIA Technologies Inc. M-Audio Delta Audiophile
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at bc00 [size=32]
I/O ports at b800 [size=16]
I/O ports at b400 [size=16]
I/O ports at b000 [size=64]
Capabilities: [80] Power Management version 1
02:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 95c5
(pro g-if 00 [VGA])
Subsystem: Micro-Star International Co., Ltd. Unknown device 1181
Flags: bus master, fast devsel, latency 0, IRQ 7
Memory at e0000000 (64-bit, prefetchable) [size=256M]
Memory at fdcf0000 (64-bit, non-prefetchable) [size=64K]
I/O ports at ac00 [size=256]
Expansion ROM at fdcc0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint IRQ 0
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Capabilities: [100] Unknown (11)
***********************************************************************
Envy24 refuses to start at all.
>From Jack I get this:
******************************************************
Enhanced3DNow! detected
SSE2 detected
apparent rate = 48000
creating alsa driver ... hw:1|hw:1|256|2|48000|0|0|nomon|swmeter|-|32bit
control device hw:1
control open "hw:1" (No such device)
ALSA lib pcm_hw.c:1357:(_snd_pcm_hw_open) Invalid value for card
ALSA lib pcm_hw.c:1357:(_snd_pcm_hw_open) Invalid value for card
ALSA: Cannot open PCM device alsa_pcm for playback. Falling back to
capture-only mode
cannot load driver module alsa
no message buffer overruns
15:41:37.846 JACK was stopped successfully.
******************************************************************
This was working fine a few hours ago.
Are these cards a bit flacky? I 've never had a sound card fail before.
Cheers
Bob
_______________________________________________
64studio-users mailing list
[email protected]
http://lists.64studio.com/mailman/listinfo/64studio-users
