Fons Adriaensen wrote: > jkmeter started with the -C option. 1.
Qtractor > imported a sine at 440Hz mono Qtractor Master/out_1 connected to jkmeter in-1 and in-2 > phases are fine, at +1 Qtractor Master/out_1 connected to jkmeter in-1 and Qtractor Master/out_2 connected to jkmeter in-2 > phases are fine, at +1 2. Audacity > imported a sine at 440Hz mono Audacity out connected with Qtractor in (not visible by any JACK connection GUI) and Qtractor Master/out_1 connected to jkmeter in-1 and Qtractor Master/out_2 connected to jkmeter in-2 > phases are fine, at +1 3. Anyway, an Oberheim Matrix-1000 connected to the sound card channel 1 and than connected by JACK system capture_1 to Qtractor Master/in 1 and Master/in_2, while Qtractor Master/out_ was connected to system playback_1 and Qtractor Master/out_2 was connected to system playback_2 the sound WAS bad, when I rooted the subgroop by my mixing console to mono AND it was not the mixing console, for other sources doing this the sound was fine. 4. Oberheim Matrix-1000 connected to the sound card channel 1, system capture_1 connected to Qtractor Master/in 1 and Master/in_2, Qtractor Master/out_1 connected to jkmeter in-1 and Qtractor Master/out_2 connected to jkmeter in-2 > phases are fine, at +1 but without playing the Oberheim phases aren't at 0 or +1, but a little bit beneath 0 at +. Checking it by headphones on mono the sound is fine :). This is very strange! It wasn't fine some days ago, but it seems to be not JACK, but some kind of voodoo :D. Now everything is fine :). Cheers, Ralf _______________________________________________ 64studio-users mailing list [email protected] http://lists.64studio.com/mailman/listinfo/64studio-users
