Hi all :)
any ideas?
spinymouse-s...@64studio:/etc/X11$ sudo cp -p xorg.conf_radeon xorg.conf
spinymouse-s...@64studio:/etc/X11$ sudo gedit xorg.conf
Driver changed to "nv".
Reset > Blabla "Continue"
spinymouse-s...@64studio:/etc/X11$ cat xorg.conf | grep nv
Driver "nv"
spinymouse-s...@64studio:/etc/X11$ diff xorg.conf xorg.conf_radeon
21c21
< Driver "nv"
---
> Driver "radeon"
spinymouse-s...@64studio:/etc/X11$ cat xorg.conf
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "ro"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "Device"
Identifier "Configured Video Device"
Boardname "VESA driver (generic)"
Busid "PCI:1:5:0"
Driver "nv"
Screen 0
Option "MergedFB" "off"
EndSection
Section "Monitor"
DisplaySize 305 230
HorizSync 29-98
Identifier "Configured Monitor"
Modelname "Plug 'n' Play"
Vendorname "Plug 'n' Play"
VertRefresh 50-120
modeline "1152x864" 128.42 1152 1232 1360 1568 864 865 868 910
Gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
Defaultdepth 24
SubSection "Display"
Depth 24
Modes "1152x864"
Virtual 3840 1200
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
EndSection
Section "Module"
Load "glx"
Load "GLcore"
Load "v4l"
EndSection
Section "ServerFlags"
EndSection
Unfortunately only 800 x 600 and 640 x 480 always at 61 KHz are
available. 1152 x 864 and something around 90 KHz aren't available any more.
Then I changed xorg.conf for
Section "Module"
#Load "glx"
#Load "GLcore"
#Load "v4l"
EndSection
spinymouse-s...@64studio:~$ hwinfo --memory
01: None 00.0: 10102 Main Memory
[Created at memory.61]
Unique ID: rdCR.CxwsZFjVASF
Hardware Class: memory
Model: "Main Memory"
Memory Range: 0x00000000-0x7fedffff (rw)
Memory Size: 2 GB
Config Status: cfg=new, avail=yes, need=no, active=unknown
spinymouse-s...@64studio:~$ hwinfo --gfxcard
11: PCI 100.0: 0300 VGA compatible controller (VGA)
[Created at pci.296]
UDI: /org/freedesktop/Hal/devices/pci_10de_1d3
Unique ID: VCu0.N4ziuOvi1EE
Parent ID: _Znp.o7NX_+MbKz8
SysFS ID: /devices/pci0000:00/0000:00:02.0/0000:01:00.0
SysFS BusID: 0000:01:00.0
Hardware Class: graphics card
Model: "CardExpert GeForce 7300 SE"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x01d3 "GeForce 7300 SE"
SubVendor: pci 0x10b0 "CardExpert Technology"
SubDevice: pci 0x0401
Revision: 0xa1
Memory Range: 0xfa000000-0xfaffffff (rw,non-prefetchable)
Memory Range: 0xd0000000-0xdfffffff (rw,prefetchable)
Memory Range: 0xfb000000-0xfbffffff (rw,non-prefetchable)
Memory Range: 0xfcfe0000-0xfcffffff (ro,prefetchable,disabled)
IRQ: 5 (no events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v000010DEd000001D3sv000010B0sd00000401bc03sc00i00"
Driver Info #0:
XFree86 v4 Server Module: nv
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #28 (PCI bridge)
Primary display adapter: #11
The card should be a GAINWARD 7200GS PCX - GEFORCE 256 MB.
Shut Down
Serial number and informations on the card confirm that it's a GAINWARD
7200GS PCX - GEFORCE 256 MB and not a GeForce 7300 SE.
There were still blabla messages, so I need to click continue and
resolution and frequency are still bad.
Hm, I need to buy something to eat now. Try to search the web later,
perhaps I first try to use Suse and/ or Karmic.
Any hints are welcome,
Ralf
_______________________________________________
64studio-users mailing list
[email protected]
http://lists.64studio.com/mailman/listinfo/64studio-users
