Hi Just to point out. I can receive all 8 channels back from the pc the the DDX But If I select channel 1 and input a guitar I get nothing in Ardour.
If I use chan 9 and select this in Ardour I get a signal as expected. Seems one bank isn't getting anything (1 to 8) This is what happened on the other desk and after re-installing it all worked. I have set jack to connect chan 1 to chan 1 in Ardour but still nothing. Both desks are locked to the RME card @48k hdsp is showing a hdsp 9652 jack shows two cards: hw0 hamerfall dsp hw 0.0 hamerfall 9652 (this is selected) Why is there two? only one card on here Cheers All Bob On 13 September 2010 05:34, Quentin Harley <[email protected]> wrote: > Hi, > > Strange indeed. I have used the RME device for many years with no > problems, my only audio problems originating from device order in > alsa. > > I will scratch around for you a bit... > > Cheers, > Quentin > > On 9/12/10, Frank Smith <[email protected]> wrote: > > HI All > > I have again lost the first 8 channels on my RME hdsp card. > > > > When I last re-installed 64studio I seemed to get them back! > > > > Is there a way to re-install just the driver for the sound card, I ended > up > > last time stuck at 800 x 600 for a week. > > > > This seems to be a recurring problem of late. > > Has there been major changes to the alsa driver? > > > > Cheers > > Bob > > > > -- > Sent from my mobile device >
_______________________________________________ 64studio-users mailing list [email protected] http://lists.64studio.com/mailman/listinfo/64studio-users
