On Sat, Sep 18, 2010 at 6:42 AM, Frank Smith <[email protected]> wrote: > Hi All > I have now re-installed 64studio beta 3 > Cannot get HDSPcinf to run at all The card is now a RME 9632.
I have never used this particular card. I only have experience with the 9652s, and they have always just worked. Does the card show up in lspci? What about an entry in /proc/interrupts Does the 9632 use the same driver as the 9652 (hdsp)? If so, is the module loaded (lsmod |grep hdsp)? Anything interesting in the logs? Try "grep hdsp /var/log/messages" or "grep hdsp /var/log/syslog" or "grep /var/log/udev". > Also I have treid to get flash running: >> >> Launch synaptic and if needed remove "flashplugin-nonfree" and "gnash". >> After that install "flashplugin-nonfree" (again). >> > I get an error now saying nsplugin not found and cannot be installed. > > Any ideas for now I would not bother using apt for flash. I now get flash directly from adobe: http://www.adobe.com/support/flashplayer/downloads.html _______________________________________________ 64studio-users mailing list [email protected] http://lists.64studio.com/mailman/listinfo/64studio-users
