The IESG has approved the following document:
- 'Registration Extensions for 6LoWPAN Neighbor Discovery'
  (draft-ietf-6lo-rfc6775-update-21.txt) as Proposed Standard

This document is the product of the IPv6 over Networks of
Resource-constrained Nodes Working Group.

The IESG contact persons are Suresh Krishnan and Terry Manderson.

A URL of this Internet Draft is:
https://datatracker.ietf.org/doc/draft-ietf-6lo-rfc6775-update/





Technical Summary

           This specification updates RFC 6775 - 6LoWPAN Neighbor Discovery, to
           clarify the role of the protocol as a registration technique,
           simplify the registration operation in 6LoWPAN routers, as well as to
           provide enhancements to the registration capabilities and mobility
           detection for different network topologies.

Working Group Summary

There has been plenty of discussion about these extensions in the working 
group. This document started in Oct. 2016 as an individual submission, but 
ideas were discussed even previous to that, including a requirements document 
(draft-thubert-6lo-rfc6775-update-reqs) which fed into this document, 6775bis. 
There have been 10 revisions based on implementation experience. Initially, it 
was a controversial document since it affects how IPv6 ND works in certain 
networks. This prompted some concern from IPv6 folks (e.g., Lorenzo Colitti) 
concerned that these modifications were not generally applicable to all link 
layers or situations. In response, the authors made changes to clarify the 
scope of the extensions. Section 2, in particular was modified as a result of 
these debates and exchanges.

Document Quality

These extensions have been implemented in open source (OpenWSN, Cisco IOS) and 
have been tested in 6TiSCH/6lo ETSI Plugtest.

Personnel

   Gabriel Montenegro is the Document Shepherd. Suresh Krishnan is the 
Responsible Area Director.

_______________________________________________
6lo mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/6lo

Reply via email to