Hi Pascal, On Thu, 4 Jul 2019 at 23:24, Pascal Thubert (pthubert) <[email protected]> wrote: > > Hello Mark: > > > > There are a number of things that the router would like to know in the > process: > > A sense of lifetime; how long should the router/L3AP expect that the address > will be used; at time out, the router can clean up the state.
Already being performed by NUD right now. NUD avoids the possibility of the router's view of when an address expires getting out of sync with when the address does or has expired on a host. > A sense of order; if a wireless node moves rapidly from a L3AP to the next, > or a VM moves rapidly from a server to the next, which is the most recent > point of attachment What sort of device is a "L3AP"? In RFC 8200 we don't have that sort of device defined, we just have links, hosts, routers and nodes (IPv6 host or router). I'm guessing it is a combined layer 2/layer 3 device with tight integration between layer 2 and layer 3 processing? If it is, we wouldn't want to create a requirement that all layer 2 devices are also layer 3 routers for all IPv6 networks. > A sense of ownership; if the router maintains a state about the address for a > requested lifetime, then a proof of ownership can be attached, so only the > owner of the address can modify the state (SAVI) I think that can be achieved using using the state that NUD maintains and is already occurring. For example, an unsolicited NA can be sent to update remote devices' neighbor cache entry for the address with a new link-layer address, however the update only occurs if the remove device already has an existing neighbor cache entry for the address. > A sense of service; what should the router do with that address? Examples > that come to mind are inject in a routing protocol, play sleeping proxy or ND > proxy. > These requirements seem to be more specific to 6lo environments, rather than a more general and common cases. For example, hosts' addresses aren't injected into a routing protocol in most networks. However, once a router has knowledge of the existence of an address, then I think what the router uses that address knowledge for, in addition to forwarding, is out of scope for an address discovery or registration protocol. Regards, Mark. > > > It does not take new messages but a new option is needed to provide all that > information. > > > > All the best, > > > > Pascal > > > > From: Mark Smith <[email protected]> > Sent: jeudi 4 juillet 2019 14:39 > To: Pascal Thubert (pthubert) <[email protected]> > Cc: Carsten Bormann <[email protected]>; Michael Richardson > <[email protected]>; V6 Ops List <[email protected]>; 6man <[email protected]>; > [email protected] > Subject: Re: [6lo] Advocating a generalization of RFC8505 to non-6lo LANs > > > > > > On Thu., 4 Jul. 2019, 21:38 Pascal Thubert (pthubert), <[email protected]> > wrote: > > This is all very right, Carsten. > > > > RFC 6775/8505 on a new (greenfield) foo (as in IP over foo) is pretty much a > > no-brainer, if that foo has points where the 6LBR functionality is naturally > > centralized. > > No brainer it is, but for Lorenzo's issues on state preservation or > reconstruction upon router reboot. > > > > I think that can be overcome. > > > > I've been thinking for a while how to build something like this using > existing protocols and host or router behaviour. > > > > Fundamentally two stages: > > > > - collect nodes' link local addresses > > > > - query nodes' for their other GUA or ULA addresses > > > > Collecting nodes LLAs can be done via collecting source addresses from node > emitted RSess and/or MLDv2 reports. > > > > Once they've been collected, then nodes are unicast queried by routers for > their other addresses via either ICMPv6 Node Information queries or Inverse > ND. > > > > (There is currently a limitation with ICMPv6 NI that it doesn't report > temporary addresses for security reasons. That could be lifted by e.g. saying > that all addressed including temporaries are reported if the NI query source > address is an LLA i.e. limited to a query from an on-link source, or both LLA > source and that the LLA is that of a known default router.) > > > > A new node on the link effectively announces its LLA to existing routers via > RS and MLDv2 joins for solicited node groups for its addresses (and other > multicast groups it may join). > > > > If a node configures a new address, it joins the address's Solicited Node > Multicast group. Routers use that as a signal to unicast query the node it > for its updated address list to discover the new address. > > > > (DAD is another possible way for routers to collect new address information, > however I think Ericsson have some IPR over that idea, and it also doesn't > work for anycast addresses, because DADs aren't performed for them). > > > > Routers detect when an address disappears via standard ND NUD. > > > > A new router on a link can collect existing nodes' LLAs via a general MLD > query, as it does anyway to collect the set of multicast groups on the link. > Once the new router has that set of LLAs, it then unicast queries the nodes > for their other addresses. > > > > > > Perhaps a bit of pedantry, however if nodes are "Neighbours", since we now > have possibly multiple addresses per node/neighbour, ND isn't really > discovering neighbours, it's actually discovering the presence of addresses, > not "neighbours". Address Discovery or Address Presence Discovery would > perhaps be a more accurate name for this function. > > > > Regards, > > Mark. > > > > > > > > Not so easy for brownfield, i.e., in networks where classic ND is already > > used in > > some hosts and some routers. “Efficient ND” (which was essentially RFC 6775 > > for Ethernet and thus also traditional Wi-Fi) mostly didn’t take off at the > > time > > because we didn’t articulate a cohabitation (“transition”) strategy. I’m > > sure > > we can do that if we put a little more focus on it, leading to another > > specification that describes how to run in mixed classic/efficient ND > > networks. > > For I started that at 6lo and there is text in > https://datatracker.ietf.org/doc/html/draft-ietf-6lo-backbone-router , e.g., > in section 3.2. The coexistence is also discussed in > https://tools.ietf.org/html/draft-thubert-6lo-unicast-lookup but at some > point it is not a 6lo problem anymore and that work should really move > somewhere else. > > Being non-maintenance, it seems too early for 6MAN. If so maybe we should > form a short-lived WG to sort out the issues raised by Lorenzo, yours > (coexistence) and mine (limit use of broadcast / interface with a fabric > mapping server and do unicast lookup when possible). > > All the best, > > Pascal > > > -----Original Message----- > > From: Carsten Bormann <[email protected]> > > Sent: jeudi 4 juillet 2019 13:22 > > To: Pascal Thubert (pthubert) <[email protected]> > > Cc: Michael Richardson <[email protected]>; [email protected]; V6 Ops List > > <[email protected]>; 6man <[email protected]> > > Subject: Re: [6lo] Advocating a generalisation of RFC8505 to non-6lo LANs > > > > RFC 6775/8505 on a new (greenfield) foo (as in IP over foo) is pretty much a > > no-brainer, if that foo has points where the 6LBR functionality is naturally > > centralized. > > > > Not so easy for brownfield, i.e., in networks where classic ND is already > > used in > > some hosts and some routers. “Efficient ND” (which was essentially RFC 6775 > > for Ethernet and thus also traditional WiFi) mostly didn’t take off at the > > time > > because we didn’t articulate a cohabitation (“transition”) strategy. I’m > > sure > > we can do that if we put a little more focus on it, leading to another > > specification that describes how to run in mixed classic/efficient ND > > networks. > > > > Grüße, Carsten > > > > > > > On Jul 4, 2019, at 12:28, Pascal Thubert (pthubert) <[email protected]> > > wrote: > > > > > > Hello Brian: > > > > > > Yes, I'm willing to make the case. > > > > > > There are a number of reasons to enable a registration method on beyond > > 6lo networks: > > > - It is useful in wireless in general because it addresses non-transit > > > multipoint links (see > > > https://datatracker.ietf.org/doc/draft-thubert-6man-ipv6-over-wireless > > > /) and NBMA ML-subnets > > > - it is useful in particular in Wi-Fi because it reduces the need for > > > broadcast > > quite dramatically. > > > - It is useful in a switched fabric to maintain an accurate state in > > > the overlay mapping server (see > > > https://datatracker.ietf.org/doc/draft-thubert-6lo-unicast-lookup/) > > > - It is useful in a situation of host mobility in general, (see the > > > discussion in > > > https://tools.ietf.org/html/draft-ietf-rift-rift-06#section-5.3.3 ) > > > - It is useful for routers with hardware assist forwarding to avoid > > > the punting dance and dropping of packets > > > - It provides SAVI properties with a workable Secure ND (see > > > https://datatracker.ietf.org/doc/draft-ietf-6lo-ap-nd/) > > > - It provides an abstract interface to the router to get routing > > > services (already used with RIFT, RPL, see > > > https://datatracker.ietf.org/doc/draft-ietf-roll-unaware-leaves/, and > > > ND proxy, see > > > https://datatracker.ietf.org/doc/draft-ietf-6lo-backbone-router/) > > > - It solves a number of problems including Jen's, but also sleeping > > > devices on > > non-6lo networks, remote DOS against router and ND cache, and more. > > > > > > All in all I see it as a much needed modernization of ND to cope with the > > evolutions of the network (IOT, Wi-Fi and overlays) and with the new needs > > and behaviors (instant connectivity, fast roaming). > > > > > > All the best, > > > > > > Pascal > > > > > >> -----Original Message----- > > >> From: 6lo <[email protected]> On Behalf Of Michael Richardson > > >> Sent: jeudi 4 juillet 2019 02:58 > > >> To: [email protected]; V6 Ops List <[email protected]>; 6man <[email protected]> > > >> Subject: Re: [6lo] ND cache entries creation on first-hop routers > > >> > > >> > > >> Brian E Carpenter <[email protected]> wrote: > > >>>> I’m interested to have a parallel discussion on where RFC 8505 can > > >>>> not apply. In the products and use cases I’m aware of, it could, > > >>>> since we are actually faking it by snooping ND and DHCP to achieve > > >>>> similar but less accurate results. > > >> > > >>> So if you are advocating a generalisation of RFC8505 to non-6lo > > >>> LANs, that's certainly a discussion we could have, IMHO. > > >> > > >> I think that it could be applied in situations of servers, such as > > >> data centers where there are multiple tenants. (Many VM > > >> infrastructures have shared front-end networks) > > >> > > >> I think that temporary addressess are not a feature in some of those > > >> deployments that everyone wants, and thus having a registration > > >> system is a feature. > > >> > > >> This does not solve the smartphone on new WIFI issue, which is a > > >> different situation completely. > > >> > > >> -- > > >> ] Never tell me the odds! | ipv6 mesh > > >> networks [ > > >> ] Michael Richardson, Sandelman Software Works | IoT > > >> architect [ > > >> ] [email protected] http://www.sandelman.ca/ | ruby on > > >> rails [ > > > > > > _______________________________________________ > > > 6lo mailing list > > > [email protected] > > > https://www.ietf.org/mailman/listinfo/6lo > > > > > > > > -------------------------------------------------------------------- > IETF IPv6 working group mailing list > [email protected] > Administrative Requests: https://www.ietf.org/mailman/listinfo/ipv6 > -------------------------------------------------------------------- _______________________________________________ 6lo mailing list [email protected] https://www.ietf.org/mailman/listinfo/6lo
