Greetings 6lo: On the advice of Michael Richardson, I renamed draft-lynn-6lo-6lobac-bis-00 to draft-lynn-6lo-rfc8163-bis-00 and replaced the text with a minimal delta to RFC 8163 in order to pass IDnits. This should make it easier to diff future versions of the I-D with the baseline. Version -01 contains the bulk of my proposed changes to RFC 8162.
I have submitted this I-D in order to update RFC 8163 to reflect the name change of the underlying MS/TP data link in the ASHRAE BACnet standard. I have also updated references and incorporated the one errata that was reported. The differences are mainly to do with terminology, with the exception of fixing the errata. It may be the case that there's a better way to make the requisite changes to the RFC but we can discuss this in the meeting. Please let me know if you have any questions. Regards, Kerry > Internet-Draft draft-lynn-6lo-rfc8163-bis-01.txt is now available. > > Title: Transmission of IPv6 over Multidrop Serial Bus/Token Passing > (MS/TP) Networks > Author: Kerry Lynn > Name: draft-lynn-6lo-rfc8163-bis-01.txt > Pages: 26 > Dates: 2025-11-05 > > Abstract: > > Multidrop Serial Bus/Token Passing (MS/TP) is a medium access control > method for the RS-485 physical layer and is used primarily in > building automation networks. This specification defines the frame > format for transmission of IPv6 packets and the method of forming > link-local and statelessly autoconfigured IPv6 addresses on MS/TP > networks. It obsoletes RFC 8163. > > The IETF datatracker status page for this Internet-Draft is: > https://datatracker.ietf.org/doc/draft-lynn-6lo-rfc8163-bis/ > > There is also an HTML version available at: > https://www.ietf.org/archive/id/draft-lynn-6lo-rfc8163-bis-01.html > > A diff from the previous version is available at: > https://author-tools.ietf.org/iddiff?url2=draft-lynn-6lo-rfc8163-bis-01 > > Internet-Drafts are also available by rsync at: > rsync.ietf.org::internet-drafts
_______________________________________________ 6lo mailing list -- [email protected] To unsubscribe send an email to [email protected]
