#52: Prf values don't mesh with 4191's --------------------------------+------------------------------------------- Reporter: [email protected] | Owner: Type: defect | Status: new Priority: major | Milestone: Component: nd | Version: Severity: Active WG Document | Resolution: Keywords: | --------------------------------+-------------------------------------------
Comment(by [email protected]): Currently says: LoWPAN Routers with no ER available MUST set Prf to (00) for low preference, LoWPAN Routers with ER availability MUST set Prf to (01) for normal preference, and LoWPAN Edge Routers MUST set Prf to (10) for high preference. [...] The Preference Flag of the RA is used to differentiate between ERs (Prf=10) and LoWPAN Routers (Prf=01). LoWPAN Routers with Prf=00 SHOULD NOT be used for registration. Should say: LoWPAN Routers with no ER available MUST set Prf to (11) for low preference, LoWPAN Routers with ER availability MUST set Prf to (00) for normal preference, and LoWPAN Edge Routers MUST set Prf to (01) for high preference. [...] The Preference Flag of the RA is used to differentiate between ERs (Prf=01) and LoWPAN Routers (Prf=00). LoWPAN Routers with Prf=11 SHOULD NOT be used for registration. -- Ticket URL: <http://trac.tools.ietf.org/wg/6lowpan/trac/ticket/52#comment:1> 6lowpan <http://tools.ietf.org/6lowpan/> _______________________________________________ 6lowpan mailing list [email protected] https://www.ietf.org/mailman/listinfo/6lowpan
