I was asked if Key Management can be provided pre-15.4e. A number of concerns were raised about 4e including there are lots of chips out there that do not support it.

This is really challenging.

I do not see how to suborn an existing Command Frame to carry a KMP. I would have to define a new one and that would be itself a deviation from the existing 802.15 spec.

I do not see how to define a Data Payload Field for KMP that would be effective across a number of higher layers. There is no EthType field or similar differentiator. I suspect that within 6lowpan a new Dispatch Type could be defined to carry the KMP. I leave such specific 6lowpan modifications to those that created it.

As I define the KMP shim over the next two months, I would be happy to work with some 6lowpan people in developing an ID for its support within 6lowpan as well.

Or just fake out the little bit of 4e that I will use for supporting KMP within 4e. The basic thought is to use the new Information Element in either the Multifunction or Command frame. And the Command frame mode only applies to PANs that use the Associate command. So 'just' add what little you need...


_______________________________________________
6lowpan mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/6lowpan

Reply via email to