Hi Rahul,

this sounds as if fragment forwarding would help already?
(Am I reading this right that the discards are buffer space discards, not 
retransmission count packet losses?)

Grüße, Carsten

> On Apr 6, 2017, at 15:39, Rahul Jadhav <[email protected]> wrote:
> 
> Hi Carsten,
> 
> Currently I m reassembling hop by hop. 
> 
> Problem begins with initial auth session itself!! I use PANA for network 
> access in single channel (with no RDC) mesh and the payload in most PANA 
> messages crosses 127B (especially considering the relay header overhead),,, 
> its all unicast with MAC layer ACK. None of my mcast packets cross MTU 
> boundary. Also an imp point is that the buffer space is only for one IPv6 
> datagram (i.e. 1280B).
> Some of the problems highlighted by Pascal such as, fragments getting 
> discarded prematurely for e.g. because of high node density causing reception 
> from different peers is hurting the end to end msg transmission badly. The 
> failure rate and thus the retransmission rate at app is very high,, so much 
> that we had to adopt a proprietary compressed PANA signalling mechanism  to 
> improve convergence time.
> 
> Regards,
> Rahul
> 
> On 6 April 2017 at 18:24, Carsten Bormann <[email protected]> wrote:
> On Apr 6, 2017, at 10:57, Rahul Jadhav <[email protected]> wrote:
> >
> > Fragmentation at 6lo layer as it is today is almost unusable for a 
> > moderately sized network with lower MTUs such as 127B.
> 
> Hi Rahul,
> 
> please explain some more.
> 
> What kind of problem do you experience?
> 
> Is the load on your network predominantly composed of packets > 127 B?
> 
> Are you using MAC-layer ACK?
> 
> Do the problems you are seeing occur with Unicast or with Multicast?
> 
> Are you already using fragment forwarding or are you reassembling hop by hop?
> 
> Grüße, Carsten
> 
> 
> _______________________________________________
> 6tisch mailing list
> [email protected]
> https://www.ietf.org/mailman/listinfo/6tisch

_______________________________________________
6tisch mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/6tisch

Reply via email to