Yes, I have talked with all the authors and we agreed that the current version is ready for WGLC!
Tengfei On Mon, Oct 7, 2019 at 3:03 PM Pascal Thubert (pthubert) <[email protected]> wrote: > Hello Tengfei and all > > > > I see that the 2 issues of IETF 105 > > - Rules for CellList > - Downward traffic adaptation > > Were discussed and there was no objection. Do you fell ready for WGLC now? > > > > All the best > > > > Pascal > > > > *From:* 6tisch <[email protected]> *On Behalf Of *Tengfei Chang > *Sent:* vendredi 4 octobre 2019 07:25 > *To:* Pascal Thubert (pthubert) <[email protected]> > *Cc:* 6tisch <[email protected]> > *Subject:* Re: [6tisch] downstream traffic adaptation > > > > Hi Pascal, > > > > Yes, it is implemented and tested, the result is shown in the (long) email > "[6tisch] validating the downstream traffic adaptation in > draft-ietf-6tisch-msf-06". > > I attached the figure here as well. > > > > Though that email is long, all the information is the explaination of the > result figure, trying to make it clear. > > You can check the figure directly, I think is understandable for people > following the msf well. > > > > Tengfei > > > > On Fri, Aug 23, 2019 at 4:23 PM Pascal Thubert (pthubert) < > [email protected]> wrote: > > Looks good Tengfei. Did you already implement and test? > > > > Pascal > > > > *From:* 6tisch <[email protected]> *On Behalf Of *Tengfei Chang > *Sent:* vendredi 23 août 2019 14:28 > *To:* 6tisch <[email protected]> > *Subject:* [6tisch] downstream traffic adaptation > > > > Hi All, > > > > As discussed in IETF 105, we are going to support adapting downstream > traffic. > > And now this feature is added in draft-ietf-6tisch-msf-06 published one > weeks ago. > > > > Some main changes related to this feature are: > > 1. After joined the network and got Rank, the node will only add one > Tx Cell to its parent (NOT add Rx Cell) > 2. When adapting downstream traffic, the mote will check the cell > usage on the Rx Cells. > 3. At each Rx cell to parent, the NUMCELLELAPSE increments > 4. If there is any frames received on the Rx cell, the NUMCELLUSED > increments > 5. If NUMCELLELAPSE reaches MAX_NUMCELLS, check the percentage of cell > usage, if higher than the high threshold, add one Rx cell to parent, if > lower than the low threshold, remove one Rx cell to parent. > 6. The AutoRx cell is used for downstream as well and will never be > removed. > > Those changes are integrated into version 06 content.. You can read it to > check exactly how we did the changes. > > Please let me know if you have comments on them.. Thanks! > > > > Tengfei > > > > -- > > Chang Tengfei, > > Postdoctoral Research Engineer, Inria > > > > > -- > > —————————————————————————————————————— > > > > Dr. Tengfei, Chang > > Postdoctoral Research Engineer, Inria > > > > www.tcahng.org > > —————————————————————————————————————— > -- —————————————————————————————————————— Dr. Tengfei, Chang Postdoctoral Research Engineer, Inria www.tcahng.org ——————————————————————————————————————
_______________________________________________ 6tisch mailing list [email protected] https://www.ietf.org/mailman/listinfo/6tisch
