Hi ! Use 9P instead of iSCSI. In My setup, I use small IDE Flash drives (128Mb) They works just fine ! :)
2008/10/20 <[EMAIL PROTECTED]> > Hola, > > Has anyone done this? > > I have access to a cheap hardware which could be a nice plan9 cpu server, > the only thing does not work > is the iSCSI disk (or i think so, look at the lspci below) > > I suppose the bios of the machine supports booting from iSCSI, so i think i > could put a 9load or > 9pxeload there, but 9load is not able to load a kernel from iSCSI and i > suppose i can't instruct 9pxeload > to boot from specific server without using bootp/dhcp to boot, right? > > any tips on how to make this little thing work? (besides writing iSCSI > support for 9load) > > here is he lspci output (it is a dualcore atom 1.6ghz intel board, 1gb of > ram): > > > 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub > (rev 02) > 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated > Graphics Controller (rev > 02) > 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port > 1 (rev 01) > 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port > 3 (rev 01) > 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port > 4 (rev 01) > 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI > Controller #1 (rev 01) > 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI > Controller #2 (rev 01) > 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI > Controller #3 (rev 01) > 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI > Controller #4 (rev 01) > 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI > Controller (rev 01) > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) > 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC > Interface Bridge (rev 01) > 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE > Controller (rev 01) > 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA > IDE Controller (rev 01) > 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev > 01) > 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B > PCI Express Gigabit > Ethernet controller (rev 02) > > thanks > > gabi > PS: it has an ide controller but with no disks attached > > > > -- С Уважением Жилкин Сергей
