On Mon Jan 26 05:42:16 EST 2009, [email protected] wrote: > well i get this > PBSI......plan9 from bell labs > ELCR:0C28 > pcirouting:8086/27DF at pin 1 irq 3 > dev A0 port C400 config 0C5A capabilities 2F00 mwdma 0007 udma 207F > LLBA sectors 625142558 > > and then it just sort of hangs there and nothing else goes on.
you wouldn't happen to have sata ports and pata connectors on the motherboard would you? this could be a war between the legacy interface and the ahci interface running on the same drives. what you can change is the configuration of the pata/sata ports in bios. try setting up ahci mode first. if your bios is currently set to "conbined" mode, try normal mode, too. if things still aren't working, could you add *pcihinv=1 to your plan 9 ini and send the output? (or run lspci -vvvn under linux) - erik
