When booting plan9 in vmware the graphics seem to work fine up
to 1024x768x8, but higher resolutions cause a panic trying to
write to a non-existant address. (Didnt map enough memory for
the screen maybe?) It seems to put the card in the right mode
and even print out the stack trace onto the highres screen.
Anyone know whats going on here?
-----
panic: kernel fault: bad address pc=0xf01eb43e addr=0xe03c0000
panic: kernel fault: bad address pc=0xf01eb43e addr=0xe03c0000
acid points to libmemdraw/line.c:351
at 1024x768x aux/vga -p says:
vga->attr: vid=0x15AD
vga->attr: did=0x0405
vga misc E3
vga feature 00
vga sequencer 03 01 0F 00 0A
vga crt A3 7F 88 9A 86 1A 24 FD - 00 60 00 00 00 00 00 00
03 29 FF 80 60 03 04 A3 - FF
vga graphics 00 00 00 00 00 50 05 0F - FF
vga attribute 00 01 02 03 04 05 06 07 - 08 09 0A 0B 0C 0D 0E 0F
41 FF 0F 00 00
vga virtual 0 0
vga panning off
vga vm a b 0 3489660928
vga apz 134217728
vga linear 1
vmware ID 90000002
vmware Enable 00000001
vmware Width 00000400
vmware Height 00000300
vmware MaxWidth 00000938
vmware MaxHeight 000006ea
vmware Depth 00000018
vmware Bpp 00000020
vmware PseudoColor 00000000
vmware RedMask 00ff0000
vmware GreenMask 0000ff00
vmware BlueMask 000000ff
vmware Bpl 00001000
vmware FbStart d0000000
vmware FbOffset 00000000
vmware FbMaxSize 08000000
vmware FbSize 00300000
vmware Cap 001fc3e2
vmware MemStart d8000000
vmware MemSize 00200000
vmware ConfigDone 00000001
vmware Sync 00000001
vmware Busy 00000000
vmware GuestID 00005010
vmware CursorID 00000001
vmware CursorX 000002bf
vmware CursorY 000000bd
vmware CursorOn 00000001
vmware HostBpp 00000020
vmware chan x8r8g8b8
vmware depth 32
vmware linear
Tim Newsham
http://www.thenewsh.com/~newsham/
