On 24 ноя, 20:52, quans...@quanstro.net (erik quanstrom) wrote: > > Thanks for the replies. > > 1. -vga std/vmware options on QEMU have no effect > > 2. bit mode change has no effect too (only "artefact line" on top of > > blank screen change its color) > > 3. during installation or booting from CD all works perfect.... > > ok, then assuming it's not kernel build differences, > you have all the variables at your disposal: > /n/sources/plan9/sys/lib/dist/pc/plan9.ini.cd > look for differences with your .ini. i thought the install > usually set *nomp=1, but if it's unset, that'd be my first > bet. otherwise, the video mode must be differently > set when you boot from cd. > > - erik 1. I compared the files plan9.ini.cd and plan9.ini, and no significant differences are found
*nomp=1 *nobiosload=1 *nodumpstack=1 2. After installing the monitor = ask and vgasize = ask, was loaded into the default mode 640x480x8 (xga) 3. vga, vesa does not work 4. Maybe there is some difference in the kernels? plan9.ini.cd bootfile=sdD0!cdboot!9pcflop.gz plan9.ini bootfile=sdC0!9fat!9pcf
