Ok. I have installed Plan9 in an empty hard disk and the bootloader works fine. have the bootloader got any problems if the Plan9 partition is above 1024 cylinders?
Cheers. pmarin On Sat, Apr 9, 2011 at 7:18 AM, pmarin <[email protected]> wrote: > I have a problem after installing 9atom in an old HP Optiplex GX110 > (i810e/PIII) > > When I start the machine the screen only show > PBS2...Plan 9 from Bell Labs > and after a few second the machine is rebooted. > > Can someone tell me what I have to do now? > > Some info ( a few Spanglish sorry): > fdisk -l > Disco /dev/hda: 30.0 GB, 30060527616 bytes > 255 heads, 63 sectors/track, 3654 cylinders > Units = cilindros of 16065 * 512 = 8225280 bytes > Disk identifier: 0x00000000 > > Disposit. Inicio Comienzo Fin Bloques Id Sistema > /dev/hda1 1 1216 9767488+ 83 Linux > /dev/hda2 1217 1338 979965 f W95 Ext'd (LBA) > /dev/hda3 * 1339 3654 18603270 39 Plan 9 > /dev/hda5 1217 1338 979933+ 82 Linux swap / Solaris > > lspci > 00:00.0 Host bridge: Intel Corporation 82810E DC-133 (GMCH) > Graphics Memory Controller Hub (rev 03) > 00:01.0 VGA compatible controller: Intel Corporation 82810E DC-133 > (CGC) Chipset Graphics Controller (rev 03) > 00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02) > 00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02) > 00:1f.1 IDE interface: Intel Corporation 82801AA IDE Controller (rev 02) > 00:1f.2 USB Controller: Intel Corporation 82801AA USB Controller (rev 02) > 00:1f.3 SMBus: Intel Corporation 82801AA SMBus Controller (rev 02) > 00:1f.5 Multimedia audio controller: Intel Corporation 82801AA > AC'97 Audio Controller (rev 02) > 01:07.0 USB Controller: NEC Corporation USB (rev 43) > 01:07.1 USB Controller: NEC Corporation USB (rev 43) > 01:07.2 USB Controller: NEC Corporation USB 2.0 (rev 04) > 01:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M > [Tornado] (rev 78) >
