Dear Erik,
On 14 November 2011 16:07, erik quanstrom <[email protected]> wrote:
>> I have a ralink rt2561 wireless pcmcia card. What is the way to check
>> if this card is recognized and can be used from plan9?
>> Is there anything like linux' lspci command?
>
> the command you're looking for is "pci".
>
> - erik
my output of 'pci -v' looks like this:
0.0.0: brg 06.00.00 8086/3575 0
Intel Corporation 82830[MP] Host-Hub I/F Bridge / SDRAM Controller
0.2.0: vid 03.00.00 8086/3577 9 0:e8000008 134217728 1:e0000000 524288
Intel Corporation 82830M/MG Integrated Graphics Device
0.2.1: vid 03.80.00 8086/3577 0 0:f0000008 134217728 1:e0080000 524288
Intel Corporation 82830M/MG Integrated Graphics Device
0.29.0: usb 0c.03.00 8086/2482 9 4:00001801 32
Intel Corporation 82801CA/CAM USB Controller
0.29.1: usb 0c.03.00 8086/2484 5 4:00001821 32
Intel Corporation 82801CA/CAM USB Controller
0.29.2: usb 0c.03.00 8086/2487 5 4:00001841 32
Intel Corporation 82801CA/CAM USB Controller
0.30.0: brg 06.04.00 8086/2448 0
Intel Corporation 82801BAM/CAM/DBM Hub Interface to PCI Bridge
0.31.0: brg 06.01.00 8086/248c 0
Intel Corporation 82801CAM LPC Interface or ISA bridge: see Notes
0.31.1: disk 01.01.8a 8086/248a 5 0:000001f1 16 1:000003f5 16
2:00000171 16 3:
00000375 16 4:00001861 16 5:e0100000 1024
Intel Corporation 82801CAM UltraATA IDE Controller
0.31.3: smb 0c.05.00 8086/2483 9 4:00001881 32
Intel Corporation 82801CA/CAM SMBus Controller
2.2.0: ser 07.80.00 125d/2838 5 0:00002441 16
ESS Technology ES56H-PI4555 Data Fax Modem
2.3.0: aud 04.01.00 125d/1988 5 0:00002001 256
ESS Technology ES1999 ESS Allegro PCI Audio (WDM)
2.4.0: brg 06.07.00 1217/6933 9
O2Micro Inc OZ6933 CardBus Controller
2.4.1: brg 06.07.00 1217/6933 9
O2Micro Inc OZ6933 CardBus Controller
2.8.0: net 02.00.00 8086/1031 10 0:e0200000 4096 1:00002401 64
Intel Corporation 82801CAM PRO/100 VE Network Connection
Am I right that the interesting part for me is that about O2Micro at
about the end of the list? Is this the device into which I plug the
pcmcia card?
Anyway. This list seems to not change when I plug my wifi card in...
Does it mean the plugged-in hardware (wifi) is not recognised, or can
it be that the CardBus controller is not working?
(Btw., is there anything like /var/log/messages in plan9 so that one
could watch 'in real time' what is happening e.g. when the card is
inserted?)
Thank you!
Ruda
