Hello, I have a usb flash drive.
[ When plugged into my linux, /var/log/messages gives: Jan 11 10:28:14 redstar kernel: [ 388.588091] usb 1-3: new high speed USB device using ehci_hcd and address 3 Jan 11 10:28:14 redstar kernel: [ 388.743813] usb 1-3: New USB device found, idVendor=058f, idProduct=6387 Jan 11 10:28:14 redstar kernel: [ 388.743826] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jan 11 10:28:14 redstar kernel: [ 388.743837] usb 1-3: Product: Mass Storage Jan 11 10:28:14 redstar kernel: [ 388.743844] usb 1-3: Manufacturer: Generic Jan 11 10:28:14 redstar kernel: [ 388.743851] usb 1-3: SerialNumber: ABC01089 Jan 11 10:28:14 redstar kernel: [ 388.746708] scsi4 : usb-storage 1-3:1.0 Jan 11 10:28:15 redstar kernel: [ 389.749192] scsi 4:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2 Jan 11 10:28:15 redstar kernel: [ 389.753494] sd 4:0:0:0: Attached scsi generic sg2 type 0 Jan 11 10:28:15 redstar kernel: [ 389.754612] sd 4:0:0:0: [sdb] 8007680 512-byte logical blocks: (4.09 GB/3.81 GiB) Jan 11 10:28:15 redstar kernel: [ 389.755405] sd 4:0:0:0: [sdb] Write Protect is off Jan 11 10:28:15 redstar kernel: [ 390.388661] sdb: unknown partition table Jan 11 10:28:15 redstar kernel: [ 390.391887] sd 4:0:0:0: [sdb] Attached SCSI removable disk ] It has an ext2 filesystem on itself and can be, in linux, mounted: mount /dev/sdb mnt without errors, and works. What should I do to be able to work with the drive (read/write) in plan9? (When I plug it into my plan9 machine, I don't see any entry like /dev/sdUXX, I see 3 entries under /dev/usb/, ep4.0, ep4.1 and ep4.2, which appear/disappear as I plug/unplug the device. Running usb/disk claims sth. like 'there is no disk unhandled'). Thank you for suggestions! Ruda
