i've got some ibm scrollpoint keyboards (part of a kvm thing)
that do not agree with usbd. the keyboard presents a hub
that seems to not like the set device commands.
has anyone else seen this?
- erik
% echo debug 1>/dev/usbdctl
usb/usbd: debug 1 fsdebug 0
% usb/usbd: /dev/usb/ep3.0: port 1 attach sts 0x101
usb/usbd: /dev/usb/ep3.0: port 1: attached status 0x103
usb/usbd: opendev 0x428d50 /dev/usb/ep10.0
usb/usbd; /dev/usb/ep3.0: port 1: maxpkt 8
usb/usbd: /dev/usb/ep10.0 csp hub.0.0 vid 0x04b3 did 0x3016 refs 1
none <nil> <nil>
conf: cval 1 attrib a0 40 mA
iface csp hub.0.0
alt 0 attr 3 ival 255
ep id 1 addr 129 dir in type intr itype 0 maxpkt 1 ntds 1
usb/usbd: /dev/usb/ep3.0: port 1: configed: /dev/usb/ep10.0
usb/usbd: hub 0x429670 allocated: ports 4 pwrms 100 max curr 100 pwrm 1 cmp 0
leds 0
usb/hub... usb/usbd: /dev/usb/ep10.0 port 1: sts - 0x0 -> - 0x100
usb/usbd: /dev/usb/ep10.0 port 2: sts - 0x0 -> - 0x100
usb/usbd: /dev/usb/ep10.0: port 3 attach sts 0x301
usb/usbd: /dev/usb/ep10.0: port 3: attached status 0x303
usb/usbd: opendev 0x41a950 /dev/usb/ep11.0
usb/usbd: /dev/usb/ep10.0: port 3: setaddress: transaction error
usb/usbd: closedev 0x41a950 /dev/usb/ep11.0
usb/usbd: /dev/usb/ep10.0 port 4: sts - 0x0 -> - 0x100
usb/usbd: /dev/usb/ep3.0 port 1: sts p 0x101 -> ep 0x103
