I have my nvram as a file on my fat partition. That seems to work. On May 13, 2013, at 17:32, arisawa <[email protected]> wrote:
> Hello, > > not yet with usb. > my current solution is "sdcard with sata adapter" only for NVRAM. > I will be happy if someone have a solution that uses usb flash drive only. > > Kenji Arisawa > > On 2013/05/14, at 1:37, Skip Tavakkolian <[email protected]> wrote: > >> were you able to resolve this? >> >> i have the same problem with a diskless Supermicro 5015A-EHF-D525 server >> with a 1GB ScanDisk usb. >> >> -Skip >> >> >> On Mon, Jul 30, 2012 at 2:19 AM, arisawa <[email protected]> wrote: >> Hello, >> >> I have another example that behaves somewhat different from GA-H61M-USB3-B3. >> The MB is GA-73UM-S2H. The chipset is nVIDIA GeForce 7150/nForce 630i. >> Kernel message are: >> >> Plan 9 >> cpu0: 2667MHz GenuineIntel Core 2/Xeon (cpuid: AX 0x06FB DX 0xBFEBFBFF) >> ELCR: 0C20 >> LAPIC: 0xfee00000 0xe0000000 >> mpinit: scanning acpi madt for extra cpus >> cpu1: 2667MHz GenuineIntel Core 2/Xeon (cpuid: AX 0x06FB DX 0xBFEBFBFF) >> mtrrfix1: i9: 0 404040404040404 >> mtrrfix1: i10: 0 404040404040404 >> pcirouting: ignoring south bridge PCI.0.0.0 10DE/07C0 >> #l0: igbepcie: 1Gbps port 0xE4080000 irq 10: 6805ca00fbd2 >> mpintrenable: out of choices eisa -1 isa 5 tbdf 0xc002000 irq 11 >> intrenable: couldn't enable irq 11, tbdf 0xC002000 for usbohci >> mpintrenable: out of choices eisa -1 isa 5 tbdf 0xc002100 irq 5 >> intrenable: couldn't enable irq 5, tbdf 0xC002100 for usbehci >> 3198M memory: 149M kernel data, 3048M user, 3673M swap >> usbinit...usbd...no usb disk...waiting for dhcp... >> auth...can't open /dev/sdXX/nvram: '/env/nvroff' file does not exist >> authid: ehci 0xe0003000: polling >> usb/disk... bootes >> authdom: aichi-u.ac.jp >> auth password: >> secstore password: >> can't write key to nvram: '/env/nvroff' file does not exist >> usbinit...partfs...version...time... >> swap: /dev/swap >> post... >> >> init: starting /bin/rc >> ar# ls /dev/sd* >> /dev/sdU0.0/ctl >> /dev/sdU0.0/data >> /dev/sdU0.0/raw >> /dev/sdctl >> ar# usb/probe >> ep1.0 roothub csp 0x000009 ports 10 ohci >> ep2.0 roothub csp 0x000009 ports 10 ehci >> ep3.0 storage csp 0x500608 vid 0x0411 did 0x0098 BUFFALO 'USB Flash Disk' >> ehci >> ar# >> >> Note that storage is detected, but "no usb disk" and then "can't open >> /dev/sdXX/nvram". >> The message: "couldn't enable irq 5, tbdf 0xC002100 for usbehci" might be a >> problem. >> >> Kenji Arisawa > >
