Thank you Gorka,
I made a mistake.
The usage of 9front is different from that of Bell-labs.
It seems FT232R is OK, but PL2303HX has a problem.
term% cat /lib/ndb/consoledb
group=sys
uid=glenda
uid=arisawa
console=usb3 dev=/dev/eiaU3 openondemand=1
gid=sys
console=usb4 dev=/dev/eiaU4 openondemand=1
gid=sys
console=usb5 dev=/dev/eiaU5 openondemand=1
gid=sys
console=usb6 dev=/dev/eiaU6 openondemand=1
gid=sys
console=usb7 dev=/dev/eiaU7 openondemand=1
gid=sys
console=usb8 dev=/dev/eiaU8 openondemand=1
gid=sys
console=usb9 dev=/dev/eiaU9 openondemand=1
gid=sys
console=usb10 dev=/dev/eiaU10 openondemand=1
gid=sys
term% cat /dev/usbevent
attach 10 067b 2303 000000ff
term% aux/consolefs
term% ls -l /mnt/con*
...
--rw-rw-rw- M 190 network network 0 Mar 17 22:09 /mnt/consoles/usb10
...
term% ls /dev/eia* # not listed eiaU10. thus we cannot set the
protocols
/dev/eia0
/dev/eia0ctl
/dev/eia0status
/dev/eia1
/dev/eia1ctl
/dev/eia1status
term%
PL2303HX on Bell-labs version has a similar problem.
Thank you again.
Kenji Arisawa
2014/03/16 17:14、Gorka Guardiola <[email protected]> のメール：
> Isn't it a variant of the version (almost) supported? There were sone issues
> at fast speed, but I believe it is there in the distro.
>
>
> G.
>
>> On Mar 16, 2014, at 6:40 AM, arisawa <[email protected]> wrote:
>>
>> Hello,
>>
>> Anyone has a driver for FT232R or PL2303HX?
>> Or working on those drivers?
>>
>> Kenji Arisawa
>>
>>
>
