On Wed, Apr 02, 2014 at 06:02:23PM -0400, erik quanstrom wrote: > On Wed Apr 2 17:49:51 EDT 2014, [email protected] wrote: > > > if you do a pull as glenda, or alternately > > > > > > mount /srv/boot /n/root && > > > 9fs atom && > > > disk/mkfs -vkU -s /n/atom/plan9^`{pwd} -d . <{echo +} > > > > > > you can then try "mkusbboot -p `{echo +}". this may actually work. > > srv: dial tcp!atom.9atom.org!fs: cs: can't translate address: > > '/srv/dns' file > > does not exist. > > It seems to me like an issue with internet connection. Am I right? > > One more question to this command. You've used pwd in it, so what directory > > should I be in, in > > order to run command successfully? Why do I need to run this first mount > > command(the /n/root seems > > to be used nowhere)? > > yes. you can either run ndb/dns -r and ndb/cs and then try again, or replace > "9fs atom" with > > attaip=208.71.233.235 > nflag=-n > srv $nflag -q tcp!$attaip atom && > mount $nflag /srv/atom /n/atom atom But my ethernet device probably is not recognised. When I run ip/ipconfig I get: ipconfig: /net/ipifc/clone: bind ether /net/ether0: '/net/ether0' cs: file does not exist
It looks to me like the need of ordering a new ethernet card. I will try to order 8169 as you've recomended and try to connect to the internet again. > > > there is not enough room on the usb key to install all. > > The other problem is that after compiling usb and all it dependences when > > I've rebooted > > the plan 9 atom all programs disappeared and I've needed to compile them > > again. Is there any method to > > make the changes to the disk persistent? > > changes to the disk are persistent. i suspect the executables are > misplaced. are you booting from the hard drive? I'm booting from pendirve which I've setuped as you described earlier(using dd). Maybe it's happening becouse I turn off my computer by pressing power button. How can I turn off plan9 in a clear way? BR, Szymon
