On Mon, Jan 25, 2021 at 08:06:05PM +0000, Richard Miller wrote: > > Did you bind '#l1' first?
Yes, I did. Basically followed the same instructions as you wrote below (think I even took them from your reply on an older thread so thanks!) plus 'ndb/dns -r'. Worked for 2.4GHz but not for 5GHz. A quick internet search suggests a possibility that the 5GHz band may need to be enabled by setting the regulatory domain/region. Will give it another try at some point; a bit hesitant right now since it's a normally headless setup and I don't want to mess with connectivity too often. > Here's what works for me: > > term% bind -a '#l1' /net > term% aux/wpa -2p -s 1d2e12-5GHz /net/ether1 > > !Adding key: essid=1d2e12-5GHz proto=wpapsk > password: > term% ip/ipconfig ether /net/ether1 > term% cat /net/ipselftab > term% ip/ping 9p.io > sending 32 64 byte messages 1000 ms apart to icmp!9p.io!1 > 0: rtt 32638 µs, avg rtt 32638 µs, ttl = 246 > 1: rtt 29566 µs, avg rtt 31102 µs, ttl = 246 > ... ------------------------------------------ 9fans: 9fans Permalink: https://9fans.topicbox.com/groups/9fans/Tbb87a85e4d7ad382-M24feb931340b10cc3bc8a701 Delivery options: https://9fans.topicbox.com/groups/9fans/subscription
