Howdy- I recently bought a Raspberry Pi 400 and installed Richard Miller's 9pi img (https://9p.io/sources/contrib/miller/9pi.img.gz) onto a microSD card via Raspberry Pi's Imaging tool.
Everything works fine and I'm really enjoying learning Plan 9, however some monitors don't detect any signal. That is, if I plug into a ~10 year old Vizio television everything works fine at a reasonable resolution (1280x1024? I haven't yet figured out which utility to use to query display properties), but if I plug it into a Dell S2817Q the monitor says "No signal detected." I've successfully plugged the Pi back and forth between the two displays several times and the behavior is consistent: everything works fine on the smaller, older Vizio tv, but "no signal" on the Dell. Has anyone else experienced anything like this? Any suggestions for things to try? I would prefer using the Dell monitor to the Vizio tv, but I'm not concerned about the resolution. That is, I would happily prefer running Plan 9 on the Pi at 640x480 on the Dell rather than the higher resolution on the Vizio. (Ideally, of course, I would like to run at the highest resolution possible on the Dell, but for the time being I'd just be happy with anything working on the Dell) Thank you in advance! ------------------------------------------ 9fans: 9fans Permalink: https://9fans.topicbox.com/groups/9fans/T295835c4cafb6d4f-Mb8abec25c192665db0434e0f Delivery options: https://9fans.topicbox.com/groups/9fans/subscription
