"gnufan42 via 9fans" <[email protected]> wrote:
> Hello 9Fans,
>
> I'm trying to get network working on a spare laptop. The laptop in question
> is relatively new, and has no extra PCI or PCIe slots, so I'll have to find a
> USB network adapter (I have an AX88772B, but that isn't recognized. In fact,
> the only thing I tried that worked was an Android phone with tethering turned
> on).
>
> Can anyone recommend one (can be either Ethernet or 802.11) that works for
> Plan 9?
>
> Thanks,
> 4d5a9000
I just tried out my USB C wired ethernet adaptor in 9front with
partial success.
I don't know how to report hardware info from 9front, but here is
what OpenBSD dmesg says about my adaptor:
axen0 at uhub0 port 13 configuration 1 interface 0 "ASIX Elec. Corp.
AX88179" rev 3.00/1.00 addr 4
axen0: AX88179, address 00:90:9e:9d:0f:34
rgephy0 at axen0 phy 3: RTL8169S/8110S/8211, rev. 5
It is automatically detected by 9front's install/live ISO; after
plugging in, I just run ip/ipconfig.
It seems to work for a while (once for less than a minute, once for
a few minutes), and then I see "usbreadproc: USB Transaction Error"
printed to the console, and it stops working until I unplug, plug,
ip/ipconfig again. I only tried ip/ping and briefly browsed 9fs
9front.
Let me know if further debugging would be useful to anyone. I do
not normally run Plan 9 on that laptop (but it's my only one with
USB C ports).
--
James
------------------------------------------
9fans: 9fans
Permalink:
https://9fans.topicbox.com/groups/9fans/Ta1429dcd3e1eface-Mbbcde9589ccbe66778a93463
Delivery options: https://9fans.topicbox.com/groups/9fans/subscription
