[EMAIL PROTECTED] wrote:
> I got fed up waiting for Uriel to release his 9load replacement
> so I had to go back in and hack 9load for this. It was mostly just
> drift in the CardBus and 3Com drivers. I've tested this on a T23 with
> a 3Com/Megahertz 3CCFE575BT so your mileage may vary. I think it
> will fix the T21 with internal 3Com MiniPCI problem too.
>
> New 9load code should be on sources.
Has this made it into the CD image? I downloaded the CD yesterday and
installed on a PIII that I'm resurrecting at home, I can boot and
install from the CD (installed to a single 2G partition on a 6G disk,
fossil only), but when it comes to booting from the plan9 partition it
hangs after displaying:
ether#0: elnk3: port: 0x300 irq: 5 ...
#l0: status 0xFFFF, diag 0xFFFF
It will boot from the plan9 partition if the 3com card is removed.
> --jim
>
> On 4/3/06, Jim McKie <[EMAIL PROTECTED]> wrote:
>
>>I've noticed problems with almost all 3Com cards and adapters
>>recently. I will try to take a look at it when I retiurn from a trip.
>>
>>--jacques
Adrian
---------------------------------------------------------------
Adrian Tritschler mailto:[EMAIL PROTECTED]
Latitude 38°S, Longitude 145°E, Altitude 50m, Shoe size 44
---------------------------------------------------------------
