hi, http://plan9.bell-labs.com/wiki/plan9/installation_instructions/index.html
>The installer on the CD assumes that your CD-ROM is on the second IDE master. If your CD->ROM is elsewhere, you will see the following error: >Unknown boot device: sdD0!cdboot!9pcflop.gz >Boot device: fd0 >boot from: >IDE/ATAPI drives in Plan 9 are named like sdD0, where the capital letter is C for the primary IDE >interface and D for the second. The digit is 0 for the master and 1 for the slave. So if your CD->ROM is the primary slave, use sdC1: >boot from: sdC1!cdboot!9pcflop.gz i think this should help. You need to explicitly specify the cdrom drive you are using hope it helps! sameer On 12/21/07, codewarrior85 <[EMAIL PROTECTED]> wrote: > > Hi All, > > Am new to Plan 9. I burned the iso in a CD & tried to do a live Boot > from the CD in one of my old laptop( P2 233Mhz 32MB RAM )....I got > the boot screen ...I got the option screen & selected the option > ( 2 ).....to run it in live demo mode....After i selected the > option .....some thing came like.....Boot from fd0....I was not able > to proceed further.........It jus kept asking me enter some value.... > Som one plz help me....... > > Thanx >
