We have a cpu/auth/file server here and a few terminals, one pxe booting
and one standalone that I boot from tcp. I have things set up to the point
where I am booting fine, can access the file system, etc. I can connect
to remove cpu servers, but the strange thing is that I can't connect to my
own cpu server. I think it's probably a problem with /lib/ndb/local...
can you guys take a look at my configuration and tell me if you see any
problems?
Thanks
John
/lib/ndb/local:
#
# files comprising the database, use as many as you like, see ndb(6)
#
database=
file=/lib/ndb/local
file=/lib/ndb/common
auth=sources.cs.bell-labs.com authdom=outside.plan9.bell-labs.com
auth=csplan9.rit.edu authdom=rit.edu
auth=out9auth.cs.bell-labs.com authdom=cs.bell-labs.com
sys=go dom=go.cs.bell-labs.com
sys=outfs dom=out9auth.cs.bell-labs.com
sys=csplan9 dom=csplan9.rit.edu
authdom=ca.sandia.gov auth=plan9
ipnet=9net ip=192.168.18.0 ipmask=255.255.255.0
fs=plan9.ca.sandia.gov
cpu=plan9.ca.sandia.gov
auth=plan9.ca.sandia.gov
ipgw=192.168.18.10
dnsdomain=ca.sandia.gov
dns=192.168.18.10
dns=146.246.250.1
# CPU server
sys=plan9 dom=plan9.ca.sandia.gov
auth=plan9.ca.sandia.gov
# Linux laptop
sys=ramac ip=192.168.18.179 ether=001641e0fcfd
# Net-booting terminal
sys=gnot ether=001b210f7faa
ip=192.168.18.90
dom=gnot.ca.sandia.gov
bootf=/386/9pxeload
authdom=ca.sandia.gov
# John's terminal (with disk, root from tcp)
sys=jerq ether=001b210eaab5
auth=plan9.ca.sandia.gov
dom=jerq.ca.sandia.gov
ipgw=192.168.18.10
authdom=ca.sandia.gov
#Note this is wrong but ron is too lazy to fix it just yet.
sys=blit ether=ff1b210f7faa
ip=192.168.18.92
ipgw=192.168.18.10
dom=gnot.ca.sandia.gov
bootf=/386/9pxeload
authdom=ca.sandia.gov
# Testbed
sys=ppc ether=0002b5019094
ip=192.168.18.91
dom=ppc.ca.sandia.gov
bootf=/power/9eval.elf
authdom=ca.sandia.gov
#
# because the public demands the name localsource
#
ip=127.0.0.1 sys=localhost dom=localhost
smtp=plan9
