Hello,
I had a similar phenomenon with VB7001G using two SATAs(IDE mode).
Second SATA is unstable but I don't know where the problem comes from.
Plan 9 under single SATA(IDE mode) works fine.
Kenji Arisawa
On 2008/02/05, at 17:18, Kernel Panic wrote:
Hello,
I purchased an C7 based machine with VIA VT8237 SATA/RAID:
http://www2.digitalo.de/
deeplink.jsp;jsessionid=0FEFF78E7DE9EC893CD54A5B75AA7B60?
PROD=948733&EXT=SHOPPING
Have 2 SATA disks attached. They are detected like normal IDE devices.
The Installation of Plan9 worked fine. Created partitions and #k
mirror and setup
venti. I wanted to copy the arenas of my old fileserver to it and
then later format
fossil with the last score, but the machine fails before finishing/
reading the first
arena. :-(
First, i found that DMA was disabled for both drives, so i forced
it on with:
echo dma on >/dev/sdC0/ctl
echo dma on >/dev/sdD0/ctl
...then i get i/o errors in venti and plan9 paniced. so this was
not such a good idea i guess...
reformated all venti partitions and tried again several times with
different bios options
(without DMA, tried both bios SATA IDE and SATA RAID mode):
- after hours of disk activity, sdD0 failed... i tried to read /dev/
sdD0/data and got i/o error instantly and
after reboot worked again.
- after hours of disk activity, i see i/o-error that it cant read /
dev/sdD0/9hal.vtbloom
(venti bloomfilter partition 64MB). and then crashed with poolpanic.
http://plan9.bell-labs.com/wiki/plan9/Supported_PC_hardware/
index.html shows that this
controller should work but it doesnt for me currently.
pci -v shows the as same ids as in the sdata.c driver.
Is anybody using that sata controller? (with multiple SATA disks?)
Do i miss here something?
Are here any special BIOS options i need to get this working?
cinap
