You can not flash directly with only the .bin file. You need software to flash. I looked at the specs on this board and it appears to have an Award Flash bios. normally these are flashed with a program called awdflash. I can not guarntee that this is what is required for this board, but in the past awdflash has always worked for me.
Link to a little info for awdflash: http://www.datorintensiven.se/dinew/drivers/soyo/biosread.htm joe979xx wrote: > > There were no directions on how to do it on mfg web site. Just a > single bine file that I downloaded. I created a bootable floppy and > didn't see if I could do it that way? > > It's Win XP Pro... And it's a Venom V4DP motherboard. Here is link: > http://www.machspeed.com/ve_v4dp.htm > > > > > > If you have any questions or problems with any aspect of this site, please > feel free to contact me directly [EMAIL PROTECTED] Please do not post > personal issues directly to the group. > > To unsubscribe from this list, send an email to [EMAIL PROTECTED] > > Thank you for using A-1 Computer Tech > Yahoo! Groups Links > > > > > > > > If you have any questions or problems with any aspect of this site, please feel free to contact me directly [EMAIL PROTECTED] Please do not post personal issues directly to the group. To unsubscribe from this list, send an email to [EMAIL PROTECTED] Thank you for using A-1 Computer Tech Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/A-1-Computer_Tech/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
