All Abit motherboards al least the ones i've worked on
do need a 4 pin 12 volt connector. Boards like MSI
won't even run without this extra power supply cable.
I would also take out the cpu and reseat it. I once
did this on a customers computer and the pc fired
right up. Its also possible that the motherboard is
shorting out. You may have to take the mb out of the
case and then put in back into the case.

Tom

--- Rick Maninov <[EMAIL PROTECTED]> wrote:
> I had exactly this problem with a new motherboard
> and
> at the time was unaware of this extra 4 pin 12 volt
> connector that is required to power the CPU.
> 
> Are you sure you have plugged this connector in?
> 
> Rick
> 
> --- Maccy  wrote:
> > 
> > 
> > Hi folks,
> > 
> > I'm attempting to upgrade a system by replacing
> the
> > current mobo (Athlon
> > 700) with an ABIT board and Sempron CPU.
> > 
> > PSU was replaced for one with a 12V connector and
> > RAM replaced with PC2700
> > DDR DIMMS.
> > 
> > Trouble is the system fires (CPU fan spins) up for
> > about 30 seconds and
> > then powers straight off.
> > 
> > I've double checked component compatibility, and
> > tried alternative PSUs
> > and RAM. I've also tried with the bare mobo out of
> > the case sitting flat
> > on an anti-static bag.
> > 
> > Any ideas? Faulty mobo, or have I missed
> something?
> > 
> > Many TIA
> > 
> > Maccy
> 
> 
> No Bill G on this PC!
> 
> 
>               
> __________________________________ 
> Do you Yahoo!? 
> Yahoo! Small Business - Try our new resources site!
> http://smallbusiness.yahoo.com/resources/ 
> 


                
__________________________________ 
Do you Yahoo!? 
Yahoo! Small Business - Try our new resources site!
http://smallbusiness.yahoo.com/resources/ 


If you have any questions or problems with any aspect of this site, please feel 
free to contact me directly [EMAIL PROTECTED] Please do not post personal 
issues directly to the group.

To unsubscribe from this list, send an email to [EMAIL PROTECTED]

Thank you for using A-1 Computer Tech 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/A-1-Computer_Tech/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Reply via email to