Mike,
>I replaced my SONY CD burner with a Pioneer DVR-110D, making it my
> second to the TDK indiDVD burner. The result is the same, inoperable
> even though I went to the Pioneer site and downloaded the latest
> firmware. Should both jumpers be set to Cable Select in this case?
If you use cable select then the position on the cable will decide whether
the drive is drive zero or one. So if you do use cable select jumpering make
sure that the other drive is jumpered for the opposite end of the cable. I
would not use cable select, set the jumpers on each drive: one as drive zero
and the other as drice one. If you get them jumpered as the same number only
one drive will work, or maybe neither will work, more likely the latter.
Jim
If you have any questions or problems with any aspect of this site, please feel
free to contact me directly [EMAIL PROTECTED] Please do not post personal
issues directly to the group.
To unsubscribe from this list, send an email to [EMAIL PROTECTED]
Thank you for using A-1 Computer Tech
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/A-1-Computer_Tech/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
