I installed a 147GB U320 HD via a Ultra4 320/m SCSI Compliant converter
and, a U160 7-Device cable w/ AHA-19160. I have a 17GB U160 HD that, I
want to transfer all the info to the 147GB U320 HD.
My problem is this, when I installed the 147GB HD, it shows up as ID #0
while, the 17GB HD is ID #1. Do I need to set the 147GB HD as ID #2, to
get to the point where, I can transfer the data? I want to get rid of
the 17GB HD but, I can't do it till I transfer the info.
Christopher
If you have any questions or problems with any aspect of this site, please feel
free to contact me directly [EMAIL PROTECTED] Please do not post personal
issues directly to the group.
To unsubscribe from this list, send an email to [EMAIL PROTECTED]
Thank you for using A-1 Computer Tech
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/A-1-Computer_Tech/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
