Thanks a lot for your reply. Please guide us if the destination HDD will be formatted differently and won't be recognized by OS after Behemoth.py runs, how will this drive be used for table lookup afterwards?
Regards, Amber & Sarosh From: [email protected] To: [email protected] CC: [email protected]; [email protected]; [email protected] Subject: Re: [A51] Query - Writing Rainbow Tables Using Kraken Date: Fri, 27 Jun 2014 18:49:06 +0400 Hi, It won't work that way. You have to use separate HDDs for the destination tables, 2 or preferably 4 of them. AFAIU destination HDDs will be formatted differently so they won't be recognized by OS anymore after Behemoth.py runs. Regards, Dmitry Fri, 27 Jun 2014 15:50:16 +0500 от Amber and Sarosh <[email protected]>: Hi, We are using kraken for writing the rainbow tables to the disk for lookup for finding Kc. We are writing the tables on a 4TB disk , but errors are being encountered. The source of the tables is a folder in the 4TB disk. The destination drive is same as the source HDD. The kraken code (behemoth.py) for writing the tables when runs successfully, it shows the output of writing the tables on the terminal but somehow just after the write operation is finished, we are facing the issue of loss of data and OS on the destination HDD (the drive mentioned in /indexes/tables.conf). That HDD looses all of its data afterwards and can be reused only after formatting. Kindly help us to resolve this issue. Regards, Naheed, Amber & Sarosh _______________________________________________ A51 mailing list [email protected] https://lists.srlabs.de/cgi-bin/mailman/listinfo/a51 -- Дмитрий Полпуденко
_______________________________________________ A51 mailing list [email protected] https://lists.srlabs.de/cgi-bin/mailman/listinfo/a51
