Great! So just to be clear, I have one HD with 2 partitions (sdb1 = 4.7G and sdb2= 1.8T). This partition was made when I followed the instructions at f http://frostyhacks.blogspot.com/2015/04/gsm-wtf-bbq.html
The HD with Tables on them are listed as sdc1. How do get the Tables on sdc1 to copy over to sdb2? On Sun, May 1, 2016 at 8:28 PM, Haslinger Daniel < [email protected]> wrote: > On 02 May 2016, at 01:51, demian sims <[email protected]> wrote: > > > This was the message I received from Hacker Warehouse. > > Not sure what is needed now: ... [SNIP] > > > > So it basically said: You wanna use kraken (or deka)? - you gotta > write the tables to the raw disk(s). > > Just follow these steps: > > a) Get your empty drive hooked up. Let's assume it's at /dev/sdc > in this example - but be sure to look up what you have before > you continue. Copy pasting with non-matching device path will > mess around with your systems and hurt your feelings. > You've been warned! > > b) Grab a copy of kraken (e.g. from git://git.srlabs.de/kraken) > > c) Go to kraken/indexes > > d) copy tables.conf.example to tables.conf > > e) edit tables.conf to your needs - with only one disk, it will result > in the following line: > > *Device: /dev/sdc 40* > > f) Go to kraken/TableConvert and *make* it. > > g) The easiest way (in my opinion) is now to use the script > "Behemoth.py" in kraken/indexes to start the process. > > You will first have to uncomment line number 107, otherwise > it won't work :) > > then you start it, passing the tables.conf > > > This will take a long time now, be prepared to get some cups .. no .. > CANS of coffee. But you will be informed of any progress. > > As soon as everything is completed, you'll end up with 40 "idx" files > in your indexes folder, as well as with additional entries in your > tables.conf. > > > *If you plan to use deka:* > > you will edit delta_config.h by hand, which is a nightmare :-) > If you plan to use deka, I can send you a little shell script that will > generate > the delta_config.h from scratch, using the information from your > tables.conf. > > > hope that helps, > > > Daniel > > > /)/) >
_______________________________________________ A51 mailing list [email protected] https://lists.srlabs.de/cgi-bin/mailman/listinfo/a51
