Yesterday I did some more testing. Android 2.2 is working fine, I can rapidly surf the web and play youtube videos. Then I installed Natty, but this has the same problems as Oneiric. Pinging my router has a 20-80% packet loss. Signal strength is ok, the router is 2 meters away in the same room. Using WPA2 encryption or not makes no difference.
I think this must be a fault of the linux rt2800usb driver. Any ideas? The output from dmesg: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-1000-ac100 (buildd@ain) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #1-Ubuntu SMP PREEMPT Mon Sep 26 20:05:34 UTC 2011 [ 0.000000] CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387f [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Toshiba AC100 / Dynabook AZ [ 0.000000] PreMemHdl 0 00000008 1fd95000 00258800 0000000a [ 0.000000] FRAMEBUFFER 00000018 00010000 00258800 101a880a 02580400 02010800 00000000 00000007 [ 0.000000] DISPLAY 0000000c 00000000 00000000 00000001 00000006 [ 0.000000] PreMemHdl 1 00000008 1fd7d000 00002000 00000016 [ 0.000000] CHIPSHMOO 00000048 00010001 00000000 00000014 00000014 000005ac 000005c0 00000028 000005e8 00000028 00000610 00000014 00000624 0000002c 00020001 ad2f9361 000003f2 00000000 00000000 00000006 [ 0.000000] PreMemHdl 2 00000008 1fd7aff0 00002000 00000005 [ 0.000000] WARMBOOT 00000004 00010002 00000000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] On node 0 totalpages: 114688 [ 0.000000] free_area_init_node: node 0, pgdat c05e3000, node_mem_map c0660000 [ 0.000000] Normal zone: 896 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 113792 pages, LIFO batch:31 [ 0.000000] Tegra Revision: A02 SKU: 8 CPU Process: 2 Core Process: 1 Speedo ID: 0 [ 0.000000] PERCPU: Embedded 8 pages/cpu @c09e5000 s8416 r8192 d16160 u32768 [ 0.000000] pcpu-alloc: s8416 r8192 d16160 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792 [ 0.000000] Kernel command line: mem=448M@0M tegrapart=recovery:300:a00:800,boot:d00:1000:800,mbr:1d00:200:800 root=UUID=75f7d8f2-ff2d-4cdf-a49f-cd2e94143873 quiet splash [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] allocated 2293760 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 448MB = 448MB total [ 0.000000] Memory: 443680k/443680k available, 15072k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xdc800000 - 0xfe000000 ( 536 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .init : 0xc0008000 - 0xc0036000 ( 184 kB) [ 0.000000] .text : 0xc0036000 - 0xc0597a98 (5511 kB) [ 0.000000] .data : 0xc0598000 - 0xc05e5708 ( 310 kB) [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:448 [ 0.000000] Initial usec timer 4789779 [ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000234] Calibrating delay loop... [ 0.010065] Switched to NOHz mode on CPU #0 [ 0.270036] 1992.29 BogoMIPS (lpj=9961472) [ 0.270051] pid_max: default: 32768 minimum: 301 [ 0.270195] Security Framework initialized [ 0.270233] AppArmor: AppArmor initialized [ 0.270297] Mount-cache hash table entries: 512 [ 0.270864] Initializing cgroup subsys ns [ 0.270877] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.270898] Initializing cgroup subsys cpuacct [ 0.270937] Initializing cgroup subsys memory [ 0.270967] Initializing cgroup subsys devices [ 0.271024] CPU: Testing write buffer coherency: ok [ 0.271171] Calibrating local timer... 249.91MHz, setting to 2.50MHz. [ 0.330072] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.380138] CPU1: Booted secondary processor [ 0.390034] Switched to NOHz mode on CPU #1 [ 0.650070] Brought up 2 CPUs [ 0.650087] SMP: Total of 2 processors activated (3984.58 BogoMIPS). [ 0.650425] devtmpfs: initialized [ 0.653037] print_constraints: dummy: [ 0.653223] NET: Registered protocol family 16 [ 0.653255] TEST: bootstage_init is called in tegra [ 0.653860] host1x bus init [ 0.657117] EMC table: ramd_id: 1, tegra_sku_id 8 [ 0.657125] EMC table: using Micron 333MHz [ 0.657145] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers. [ 0.657154] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step. [ 0.657172] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.657458] tegra_iovmm_register: added iovmm-gart [ 0.665536] bio: create slab <bio-0> at 0 [ 0.665993] vgaarb: loaded [ 0.666067] i2c-core: driver [tps6586x] using legacy suspend method [ 0.666076] i2c-core: driver [tps6586x] using legacy resume method [ 0.666285] SCSI subsystem initialized [ 0.666486] usbcore: registered new interface driver usbfs [ 0.666532] usbcore: registered new interface driver hub [ 0.666623] usbcore: registered new device driver usb [ 0.667823] tps6586x 4-0034: VERSIONCRC is 05 [ 0.710230] tps6586x-regulator tps6586x-regulator.0: Probing reulator 0 [ 0.710975] print_constraints: REG-SM_0: 725 <--> 1300 mV at 1275 mV fast normal [ 0.711121] tps6586x-regulator tps6586x-regulator.1: Probing reulator 1 [ 0.711837] print_constraints: REG-SM_1: 725 <--> 1125 mV at 975 mV fast normal [ 0.712005] tps6586x-regulator tps6586x-regulator.2: Probing reulator 2 [ 0.712978] print_constraints: REG-SM_2: 3000 <--> 3700 mV at 3700 mV fast normal [ 0.713127] tps6586x-regulator tps6586x-regulator.3: Probing reulator 3 [ 0.713707] print_constraints: REG-LDO_0: 1250 <--> 3300 mV at 1250 mV fast normal [ 0.713850] tps6586x-regulator tps6586x-regulator.4: Probing reulator 4 [ 0.714823] print_constraints: REG-LDO_1: 725 <--> 1100 mV at 1100 mV fast normal [ 0.714980] tps6586x-regulator tps6586x-regulator.5: Probing reulator 5 [ 0.715549] print_constraints: REG-LDO_2: 725 <--> 1275 mV at 1275 mV fast normal [ 0.715709] tps6586x-regulator tps6586x-regulator.6: Probing reulator 6 [ 0.716553] print_constraints: REG-LDO_3: 1250 <--> 3300 mV at 3300 mV fast normal [ 0.716710] tps6586x-regulator tps6586x-regulator.7: Probing reulator 7 [ 0.717687] print_constraints: REG-LDO_4: 1700 <--> 1800 mV at 1800 mV fast normal [ 0.717878] tps6586x-regulator tps6586x-regulator.8: Probing reulator 8 [ 0.718306] print_constraints: REG-LDO_5: 1250 <--> 2850 mV at 2850 mV fast normal [ 0.718442] tps6586x-regulator tps6586x-regulator.9: Probing reulator 9 [ 0.719011] print_constraints: REG-LDO_6: 1250 <--> 2850 mV at 2850 mV fast normal [ 0.719149] tps6586x-regulator tps6586x-regulator.10: Probing reulator 10 [ 0.719708] print_constraints: REG-LDO_7: 1250 <--> 3300 mV at 3300 mV fast normal [ 0.719857] tps6586x-regulator tps6586x-regulator.11: Probing reulator 11 [ 0.720446] print_constraints: REG-LDO_8: 1250 <--> 1800 mV at 1800 mV fast normal [ 0.720588] tps6586x-regulator tps6586x-regulator.12: Probing reulator 12 [ 0.721002] print_constraints: REG-LDO_9: 1250 <--> 2850 mV at 2850 mV fast normal [ 0.721695] NetLabel: Initializing [ 0.721703] NetLabel: domain hash size = 128 [ 0.721710] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.721743] NetLabel: unlabeled traffic allowed by default [ 0.732704] AppArmor: AppArmor Filesystem Enabled [ 0.733149] tegra-nvmap tegra-nvmap: created carveout iram (256KiB) [ 0.733259] tegra-nvmap tegra-nvmap: created carveout generic-0 (53248KiB) [ 0.742114] NET: Registered protocol family 2 [ 0.742364] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.743099] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.743304] TCP bind hash table entries: 16384 (order: 5, 196608 bytes) [ 0.743511] TCP: Hash tables configured (established 16384 bind 16384) [ 0.743519] TCP reno registered [ 0.743529] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.743549] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.743892] NET: Registered protocol family 1 [ 0.743928] PCI: CLS 0 bytes, default 32 [ 0.744094] Trying to unpack rootfs image as initramfs... [ 0.859682] Freeing initrd memory: 2236K [ 0.859779] PMU: registered new PMU device of type 0 [ 0.860504] audit: initializing netlink socket (disabled) [ 0.860540] type=2000 audit(5.649:1): initialized [ 0.925911] VFS: Disk quotas dquot_6.5.2 [ 0.926206] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.927911] msgmni has been set to 870 [ 0.928928] io scheduler noop registered (default) [ 0.928938] io scheduler deadline registered [ 0.929003] io scheduler cfq registered [ 0.929309] >>> backlight_enable [ 0.929493] regulator avdd_lvds already enabled [ 0.930937] tegra_grhost tegra_grhost: initialized [ 0.931145] host1x: tegradc tegradc [ 0.931509] tegra_dvfs: rate 216000000 too high for dvfs on disp1 [ 0.950113] tegradc tegradc.0: probed [ 0.961289] Console: switching to colour frame buffer device 128x37 [ 0.972084] tegradc tegradc.0: probed [ 0.972096] host1x: tegradc tegradc [ 0.972677] nvhdcp: using "always on" policy. [ 0.972967] tegradc tegradc.1: probed [ 0.973131] tegradc tegradc.1: probed [ 0.973544] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.510235] serial8250.0: ttyS0 at MMIO 0x70006000 (irq = 68) is a XScale [ 1.670188] serial8250.0: ttyS1 at MMIO 0x70006300 (irq = 122) is a XScale [ 1.830203] Initialized tegra uart driver [ 1.830834] brd: module loaded [ 1.831486] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.835916] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller [ 1.835942] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1 [ 1.940064] tegra-ehci tegra-ehci.1: irq 53, io mem 0xc5004000 [ 1.960047] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.00 [ 1.960124] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.960136] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.960145] usb usb1: Product: Tegra EHCI Host Controller [ 1.960153] usb usb1: Manufacturer: Linux 2.6.38-1000-ac100 ehci_hcd [ 1.960161] usb usb1: SerialNumber: tegra-ehci.1 [ 1.960595] hub 1-0:1.0: USB hub found [ 1.960614] hub 1-0:1.0: 1 port detected [ 1.963413] tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller [ 1.963435] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 2 [ 2.040078] tegra-ehci tegra-ehci.2: irq 129, io mem 0xc5008000 [ 2.060082] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.00 [ 2.060145] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.060156] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.060165] usb usb2: Product: Tegra EHCI Host Controller [ 2.060172] usb usb2: Manufacturer: Linux 2.6.38-1000-ac100 ehci_hcd [ 2.060180] usb usb2: SerialNumber: tegra-ehci.2 [ 2.060597] hub 2-0:1.0: USB hub found [ 2.060614] hub 2-0:1.0: 1 port detected [ 2.060883] Initializing USB Mass Storage driver... [ 2.060960] usbcore: registered new interface driver usb-storage [ 2.060968] USB Mass Storage support registered. [ 2.061037] usbcore: registered new interface driver libusual [ 2.061046] NVidia Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007) [ 2.066589] mousedev: PS/2 mouse device common for all mice [ 2.066882] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.180061] usb 1-1: new high speed USB device using tegra-ehci and address 2 [ 2.220219] tps6586x-rtc tps6586x-rtc.0: rtc core: registered tps6586x-rtc as rtc0 [ 2.220799] trpc_sema_init: registered misc dev 10:58 [ 2.220915] trpc_node_register: Adding 'local' to node list [ 2.222904] trpc_node_register: Adding 'avp-remote' to node list [ 2.223192] tegra_avp_probe: driver registered, kernel 1f300000(dca00000), msg area 1b2d3000/1b2d3110 [ 2.223601] cpuidle: using governor ladder [ 2.223788] cpuidle: using governor menu [ 2.223832] sdhci: Secure Digital Host Controller Interface driver [ 2.223839] sdhci: Copyright(c) Pierre Ossman [ 2.223909] mmc0: Invalid maximum block size, assuming 512 bytes [ 2.224035] Registered led device: mmc0:: [ 2.224276] mmc0: SDHCI controller on platform [sdhci-tegra.3] using ADMA [ 2.224442] mmc1: Invalid maximum block size, assuming 512 bytes [ 2.224572] Registered led device: mmc1:: [ 2.224689] mmc1: SDHCI controller on platform [sdhci-tegra.0] using ADMA [ 2.224853] Registered led device: wifi-led [ 2.225168] usbcore: registered new interface driver usbhid [ 2.225176] usbhid: USB HID core driver [ 2.225262] nvec nvec.0: using adapter Tegra I2C adapter.2 [ 2.225272] nvec nvec.0: slave at i2c address 0x8a using irq 0xaa [ 2.234678] nvec nvec.0: ec firmware version 01.20.00 / f9 [ 2.235529] nvec nvec.0: added 6 NVEC devices [ 2.236194] input: nvec keyboard as /devices/virtual/input/input1 [ 2.330480] usb 1-1: New USB device found, idVendor=0424, idProduct=2512 [ 2.330491] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.330986] hub 1-1:1.0: USB hub found [ 2.331101] hub 1-1:1.0: 2 ports detected [ 2.344570] mmc0: new high speed MMC card at address 0001 [ 2.344888] mmcblk0: mmc0:0001 MMC08G 7.45 GiB [ 2.346335] tegrapart_partition: state->bdev->bd_disk->disk_name = mmcblk0 [ 2.346346] parse_tegrapart: tegrapart=recovery:300:a00:800,boot:d00:1000:800,mbr:1d00:200:800 [ 2.346358] parse_tegrapart: part #1 [recover] start=3072 size=10240 [ 2.346369] parse_tegrapart: part #2 [boot] start=13312 size=16384 [ 2.346378] parse_tegrapart: mbr start=29696 [ 2.346384] tegra_msdos_parse: mbr_offset=29696 [ 2.347195] tegra_msdos_parse: slot 1, start=2048 size=614400 [ 2.347203] tegra_msdos_parse: put_partition [ 2.347212] tegra_msdos_parse: slot 2, start=616448 size=819200 [ 2.347219] tegra_msdos_parse: put_partition [ 2.347227] tegra_msdos_parse: slot 3, start=1435648 size=4096 [ 2.347234] tegra_msdos_parse: put_partition [ 2.347242] tegra_msdos_parse: slot 4, start=1439744 size=14152704 [ 2.347249] tegra_msdos_parse: slot 4 extended partition [ 2.347255] < [ 2.347323] tegra_msdos_parse_extended: read part sector, start=29696+1439744 size=14152704 [ 2.348426] tegra_msdos_parse_extended: put_partition 6 start=29696+1440768 size=2529280 [ 2.348437] tegra_msdos_parse_extended: done with this sector [ 2.348445] tegra_msdos_parse_extended: extended part slot 2 [ 2.348453] tegra_msdos_parse_extended: read part sector, start=29696+3970048 size=11622400 [ 2.349538] tegra_msdos_parse_extended: put_partition 7 start=29696+3971072 size=11621376 [ 2.349548] tegra_msdos_parse_extended: done with this sector [ 2.349555] tegra_msdos_parse_extended: done [ 2.349561] > [ 2.349623] tegra_msdos_parse: done [ 2.349629] mmcblk0: p1 p2 p3 p4 p5 p6 p7 [ 2.450064] usb 2-1: new high speed USB device using tegra-ehci and address 2 [ 2.600385] usb 2-1: New USB device found, idVendor=0424, idProduct=2513 [ 2.600397] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.600877] hub 2-1:1.0: USB hub found [ 2.601009] hub 2-1:1.0: 3 ports detected [ 2.680136] usb 1-1.1: new high speed USB device using tegra-ehci and address 3 [ 2.807601] usb 1-1.1: New USB device found, idVendor=0db0, idProduct=822b [ 2.807613] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.807622] usb 1-1.1: Product: 802.11 n WLAN [ 2.807630] usb 1-1.1: Manufacturer: Ralink [ 2.807636] usb 1-1.1: SerialNumber: 1.0 [ 2.890294] usb 2-1.1: new high speed USB device using tegra-ehci and address 3 [ 3.003509] usb 2-1.1: New USB device found, idVendor=0bdb, idProduct=190a [ 3.003521] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.003530] usb 2-1.1: Product: F3307 [ 3.003536] usb 2-1.1: Manufacturer: Û F3307 [ 3.003543] usb 2-1.1: SerialNumber: 3526410400827400 [ 3.090280] usb 2-1.2: new high speed USB device using tegra-ehci and address 4 [ 3.226011] usb 2-1.2: New USB device found, idVendor=0bda, idProduct=58f2 [ 3.226023] usb 2-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 3.226032] usb 2-1.2: Product: USB Camera [ 3.226039] usb 2-1.2: Manufacturer: Y9A8G55H [ 3.226046] usb 2-1.2: SerialNumber: 200901010001 [ 3.259899] Registered led device: nvec-led [ 3.260158] input: NVEC sleep button as /devices/virtual/input/input2 [ 3.260452] input: NVEC power button as /devices/virtual/input/input3 [ 3.260738] input: NVEC lid switch button as /devices/virtual/input/input4 [ 3.261100] oprofile: using arm/armv7-ca9 [ 3.262854] TCP cubic registered [ 3.263484] NET: Registered protocol family 10 [ 3.266345] NET: Registered protocol family 17 [ 3.266623] rfkill_gpio rfkill_gpio: wifi_rfkill device registered. [ 3.266674] Registering the dns_resolver key type [ 3.266714] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1 [ 3.266773] ThumbEE CPU extension supported. [ 3.266795] Registering SWP/SWPB emulation handler [ 3.273495] Capping clocks set too high: [ 3.273506] pll_e (1200000000 > 100000000) [ 3.273534] disp1 (216000000 > 190000000) (clock enabled!) [ 3.274223] registered taskstats version 1 [ 3.276498] tps6586x-rtc tps6586x-rtc.0: setting system clock to 2011-10-18 04:48:48 UTC (1318913328) [ 3.276671] Freeing init memory: 184K [ 3.378085] <30>udevd[70]: starting version 173 [ 3.646683] Btrfs loaded [ 4.018627] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null) [ 5.531661] <30>udevd[259]: starting version 173 [ 5.569896] input: ImPS/2 Logitech Wheel Mouse as /devices/serio0/input/input5 [ 6.663700] cdc_wdm 2-1.1:1.5: cdc-wdm0: USB WDM device [ 6.663877] cdc_wdm 2-1.1:1.8: cdc-wdm1: USB WDM device [ 6.663944] usbcore: registered new interface driver cdc_wdm [ 6.664846] Linux video capture interface: v2.00 [ 6.670017] cdc_acm 2-1.1:1.1: ttyACM0: USB ACM device [ 6.684356] cdc_acm 2-1.1:1.3: ttyACM1: USB ACM device [ 6.698324] cdc_acm 2-1.1:1.9: ttyACM2: USB ACM device [ 6.713065] usbcore: registered new interface driver cdc_acm [ 6.713076] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters [ 6.786026] type=1400 audit(1318913331.995:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=430 comm="apparmor_parser" [ 6.813626] type=1400 audit(1318913332.025:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=430 comm="apparmor_parser" [ 6.814297] type=1400 audit(1318913332.025:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=430 comm="apparmor_parser" [ 7.003860] uvcvideo: Found UVC 1.00 device USB Camera (0bda:58f2) [ 7.024065] input: USB Camera as /devices/platform/tegra-ehci.2/usb2/2-1/2-1.2/2-1.2:1.0/input/input6 [ 7.024395] usbcore: registered new interface driver uvcvideo [ 7.024403] USB Video Class driver (v1.0.0) [ 7.036445] cdc_ether 2-1.1:1.6: wwan0: register 'cdc_ether' at usb-tegra-ehci.2-1.1, Mobile Broadband Network Device, 02:80:37:ec:02:00 [ 7.042081] usbcore: registered new interface driver cdc_ether [ 7.192843] cfg80211: Calling CRDA to update world regulatory domain [ 7.198369] usbcore: registered new interface driver zaurus [ 7.390830] cfg80211: World regulatory domain updated: [ 7.390841] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 7.390853] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.390864] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 7.390876] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 7.390887] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.390897] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.611570] alc5632 0-001e: in i2c probe... [ 7.613206] alc5632 0-001e: got vid1: ec10 [ 7.613439] alc5632 0-001e: got vid2: 55c [ 7.613449] alc5632 0-001e: Found codec: ALC5632 (ID: 5c) [ 7.718810] alc5632 0-001e: in codec probe ... [ 7.736836] Control name 'Right Capture Mix Right Phone Capture Switch' truncated to 'Right Capture Mix Right Phone Capture Switc' [ 7.737074] alc5632 0-001e: asoc: failed to add kcontrol Right Headphone Mux [ 7.737093] alc5632 0-001e: asoc: failed to add kcontrol Left Headphone Mux [ 7.737109] alc5632 0-001e: asoc: failed to add kcontrol SpeakerOut Mux [ 7.737124] alc5632 0-001e: asoc: failed to add kcontrol AuxOut Mux [ 7.748626] EXT4-fs (mmcblk0p7): re-mounted. Opts: (null) [ 7.830343] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 7.830358] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 7.830369] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 7.830381] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 7.830391] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 7.830402] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 7.830411] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 7.830422] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 7.830432] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 7.830442] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 7.830452] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 7.830463] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 7.830472] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 7.830483] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 7.830493] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 7.830503] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 7.830513] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 7.830524] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 7.830533] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 7.830544] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 7.830554] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 7.830564] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 7.830574] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 7.830585] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 7.830594] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 7.830605] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 7.830615] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 7.830625] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [ 7.831079] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 7.833573] Registered led device: rt2800usb-phy0::radio [ 7.833681] Registered led device: rt2800usb-phy0::assoc [ 7.833785] Registered led device: rt2800usb-phy0::quality [ 7.835505] usbcore: registered new interface driver rt2800usb [ 8.241154] asoc: alc5632-hifi <-> tegra-i2s.0 mapping ok [ 8.780852] type=1400 audit(1318913333.995:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=643 comm="apparmor_parser" [ 8.792258] type=1400 audit(1318913334.005:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=644 comm="apparmor_parser" [ 8.793289] type=1400 audit(1318913334.005:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=644 comm="apparmor_parser" [ 8.794000] type=1400 audit(1318913334.005:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=644 comm="apparmor_parser" [ 8.848132] type=1400 audit(1318913334.055:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=647 comm="apparmor_parser" [ 8.851687] type=1400 audit(1318913334.065:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=647 comm="apparmor_parser" [ 8.878451] type=1400 audit(1318913334.085:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=645 comm="apparmor_parser" [ 9.384883] init: failsafe main process (581) killed by TERM signal [ 9.393429] init: apport pre-start process (680) terminated with status 1 [ 9.485649] init: apport post-stop process (708) terminated with status 1 [ 10.141002] ieee80211 phy0: device now idle [ 10.174066] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 10.574107] tegra_dvfs: rate 216000000 too high for dvfs on disp1 [ 11.080384] Bluetooth: Core ver 2.15 [ 11.080463] NET: Registered protocol family 31 [ 11.080471] Bluetooth: HCI device and connection manager initialized [ 11.080482] Bluetooth: HCI socket layer initialized [ 11.095323] ieee80211 phy0: device no longer idle - scanning [ 11.109616] Bluetooth: L2CAP ver 2.15 [ 11.109626] Bluetooth: L2CAP socket layer initialized [ 11.131688] Bluetooth: RFCOMM TTY layer initialized [ 11.131708] Bluetooth: RFCOMM socket layer initialized [ 11.131716] Bluetooth: RFCOMM ver 1.11 [ 11.169086] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.169098] Bluetooth: BNEP filters: protocol multicast [ 11.205183] Bluetooth: SCO (Voice Link) ver 0.6 [ 11.205194] Bluetooth: SCO socket layer initialized [ 12.312519] fuse init (API version 7.16) [ 12.322188] audit_printk_skb: 15 callbacks suppressed [ 12.322202] type=1400 audit(1318913337.535:17): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=919 comm="apparmor_parser" [ 12.325748] type=1400 audit(1318913337.535:18): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=919 comm="apparmor_parser" [ 13.165134] ieee80211 phy0: device now idle [ 13.368869] ieee80211 phy0: device no longer idle - scanning [ 13.657933] warning: process `colord' used the deprecated sysctl system call with 8.1.2. [ 14.724998] ieee80211 phy0: device now idle [ 14.730967] ieee80211 phy0: device no longer idle - working [ 14.764861] wlan0: direct probe to 00:1e:e5:46:0c:56 (try 1/3) [ 14.960168] wlan0: direct probe to 00:1e:e5:46:0c:56 (try 2/3) [ 15.160156] wlan0: direct probe to 00:1e:e5:46:0c:56 (try 3/3) [ 15.360052] wlan0: direct probe to 00:1e:e5:46:0c:56 timed out [ 15.410663] ieee80211 phy0: device now idle [ 16.160858] EXT4-fs (mmcblk0p7): re-mounted. Opts: commit=0 [ 16.892959] alc5632 0-001e: alc5632_pcm_hw_params: sysclk=22579200,rate=44100,coeff=0x3075 [ 16.897362] spk event: 2 [ 16.911188] alc5632 0-001e: alc5632_pcm_hw_params: sysclk=22579200,rate=44100,coeff=0x3075 [ 16.937391] alc5632 0-001e: alc5632_pcm_hw_params: sysclk=22579200,rate=44100,coeff=0x3075 [ 16.946366] alc5632 0-001e: alc5632_pcm_hw_params: sysclk=22579200,rate=44100,coeff=0x3075 [ 16.984902] alc5632 0-001e: alc5632_pcm_hw_params: sysclk=22579200,rate=44100,coeff=0x3075 [ 20.450099] ieee80211 phy0: device no longer idle - scanning [ 21.817999] ieee80211 phy0: device now idle [ 25.242770] alc5632 0-001e: alc5632_pcm_hw_params: sysclk=22579200,rate=44100,coeff=0x3075 [ 25.258213] alc5632 0-001e: alc5632_pcm_hw_params: sysclk=22579200,rate=44100,coeff=0x3075 [ 25.286822] alc5632 0-001e: alc5632_pcm_hw_params: sysclk=22579200,rate=44100,coeff=0x3075 [ 25.298792] alc5632 0-001e: alc5632_pcm_hw_params: sysclk=22579200,rate=44100,coeff=0x3075 [ 25.342331] alc5632 0-001e: alc5632_pcm_hw_params: sysclk=22579200,rate=44100,coeff=0x3075 [ 26.786609] ieee80211 phy0: device no longer idle - scanning [ 28.190753] ieee80211 phy0: device now idle [ 28.193641] ieee80211 phy0: device no longer idle - working [ 28.236118] wlan0: authenticate with 00:1e:e5:46:0c:56 (try 1) [ 28.241231] wlan0: authenticated [ 28.241282] ieee80211 phy0: device now idle [ 28.295663] ieee80211 phy0: device no longer idle - working [ 28.335173] wlan0: associate with 00:1e:e5:46:0c:56 (try 1) [ 28.338096] wlan0: RX AssocResp from 00:1e:e5:46:0c:56 (capab=0x431 status=0 aid=1) [ 28.338110] wlan0: associated [ 28.338133] ieee80211 phy0: Allocated STA 00:1e:e5:46:0c:56 [ 28.338988] ieee80211 phy0: Inserted STA 00:1e:e5:46:0c:56 [ 28.339006] ieee80211 phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0 [ 28.346300] ieee80211 phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0 [ 28.350505] ieee80211 phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0 [ 28.351861] ieee80211 phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0 [ 28.356214] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 28.370138] wlan0: dropped frame to 00:1e:e5:46:0c:56 (unauthorized port) [ 28.388101] EXT3-fs: barriers not enabled [ 28.396914] kjournald starting. Commit interval 5 seconds [ 28.404571] EXT3-fs (mmcblk0p5): using internal journal [ 28.404592] EXT3-fs (mmcblk0p5): mounted filesystem with writeback data mode [ 28.557923] EXT2-fs (mmcblk0p3): warning: mounting unchecked fs, running e2fsck is recommended [ 28.649830] EXT3-fs: barriers not enabled [ 28.679929] EXT3-fs (mmcblk0p4): warning: maximal mount count reached, running e2fsck is recommended [ 28.679978] kjournald starting. Commit interval 5 seconds [ 28.686068] EXT3-fs (mmcblk0p4): using internal journal [ 28.686088] EXT3-fs (mmcblk0p4): mounted filesystem with writeback data mode [ 28.762927] EXT3-fs: barriers not enabled [ 28.770998] kjournald starting. Commit interval 5 seconds [ 28.774110] EXT3-fs (mmcblk0p6): using internal journal [ 28.774131] EXT3-fs (mmcblk0p6): mounted filesystem with writeback data mode [ 29.210130] wlan0: dropped frame to 00:1e:e5:46:0c:56 (unauthorized port) [ 39.640046] wlan0: no IPv6 routers present [ 44.390454] spk event: 4 and lsmod: Module Size Used by vfat 9037 1 fat 43677 1 vfat cpufreq_ondemand 5984 2 fuse 60759 3 sco 8149 2 bnep 9939 2 rfcomm 33994 0 l2cap 38941 6 bnep,rfcomm bluetooth 56408 6 sco,bnep,rfcomm,l2cap binfmt_misc 6388 1 rt2800usb 10450 0 rt2800lib 39366 1 rt2800usb rt2x00usb 7890 1 rt2800usb snd_soc_tegra_i2s 4072 1 rt2x00lib 29589 3 rt2800usb,rt2800lib,rt2x00usb mac80211 246499 3 rt2800lib,rt2x00usb,rt2x00lib snd_soc_alc5632 18457 1 snd_soc_tegra_pcm 3180 1 snd_soc_tegra_das 2508 1 snd_soc_tegra_i2s snd_soc_tegra_paz00 3153 0 snd_pcm_oss 34075 0 snd_soc_core 77634 5 snd_soc_tegra_i2s,snd_soc_tegra_pcm,snd_soc_tegra_das,snd_soc_tegra_paz00,snd_soc_alc5632 snd_mixer_oss 13329 1 snd_pcm_oss zaurus 2190 0 snd_seq 48376 0 snd_pcm 59763 3 snd_soc_tegra_pcm,snd_soc_core,snd_pcm_oss cdc_ether 3228 1 zaurus uvcvideo 57376 0 cfg80211 146447 2 rt2x00lib,mac80211 usbnet 12842 2 zaurus,cdc_ether snd_timer 17516 2 snd_seq,snd_pcm cdc_wdm 7355 0 cdc_acm 13675 0 snd_seq_device 4841 1 snd_seq videodev 56146 1 uvcvideo lm90 10564 0 hwmon 1251 1 lm90 snd_soc_tegra_utils 1637 1 snd_soc_tegra_paz00 snd 42185 11 snd_soc_core,snd_pcm_oss,snd_mixer_oss,snd_seq,snd_pcm,snd_timer,snd_seq_device soundcore 5344 1 snd snd_page_alloc 4659 1 snd_pcm btrfs 639213 0 -- Mit besten Grüßen / Kind regards Joachim Fahrner _______________________________________________ Mailing list: https://launchpad.net/~ac100 Post to : [email protected] Unsubscribe : https://launchpad.net/~ac100 More help : https://help.launchpad.net/ListHelp
