Hi Gurcharan I'm using the Intensity Pro HDMI and Analog HD/SD Card. I did push it to 30 fps. Mike Quoting "Gurcharan S. Khanna" <gurcharan.kha...@rit.edu>:
> Mike, > > are you using the Intensity Pro or the Decklink ExtremeHD card? i am > suspecting > there are differences between the two. i've seen 30 fps v 60 fps as the > specs for the > Decklink v. the Intensity come up on its GUI and don't know why this is > the case. > > thanks, > > -gurcharan > > mike.w.da...@cs.cardiff.ac.uk wrote: >> >> Hi All >> Just to clarify. >> I'm using a SONY HDR-SR12E camera. >> I've tested it both in PAL and NTSC formats at 1080i and its all fine. >> In resting phase. (very little activity) I'm getting 1.8M/s transfer rate. >> Mike >> >> Quoting Nathan Gardiner <nathan.gardi...@canterbury.ac.nz>: >> >>> We have had problems trying to get an AVCHD camcorder to work with >>> BlackMagic card and i think most AVCHD camcorders that I tested didn't >>> seem to have true HDMI realtime output. >>> >>> I don't think that NTSC and PAL should make much difference as the >>> BlackMagic card accepts input from either or. >>> >>> Also, we should have a new JVC camcorder arriving in the next day or >>> so and will be testing that out. >>> >>> >>> Regards, >>> Nathan >>> >>> >>> >>> On 18/02/2009, at 11:56 AM, Jimmy Miklavcic wrote: >>> >>>> I did check it a while back and it was fine. I had to install a >>>> graphics card in order for Media Express to work. Right now I'm >>>> using the on-board VGA for the display. I didn't think I needed >>>> a high-end display card just to run the service manager. >>>> Anyway I think you and I are seeing the same symptoms. I'm >>>> using 720 @ 30p. >>>> >>>> Jimmy >>>> >>>> -- >>>> Jimmy Miklavcic >>>> Multimedia Specialist >>>> jimmy.miklav...@utah.edu >>>> >>>> UNIVERSITY OF UTAH >>>> CTR FOR HIGH PERFORM COMPUTING >>>> 155 SOUTH 1452 EAST RM 405 >>>> SALT LAKE CITY, UT 84112-0190 >>>> >>>> Office: 801.585.9335 >>>> Fax: 801.585.5366 >>>> >>>> http://www.anotherlanguage.org >>>> >>>> >>>> From: adhesionmu...@gmail.com [mailto:adhesionmu...@gmail.com] On >>>> Behalf Of Andrew Ford >>>> Sent: Tuesday, February 17, 2009 2:43 PM >>>> To: Jimmy Miklavcic >>>> Cc: mike.w.da...@cs.cardiff.ac.uk; Nathan Gardiner; ag- t...@mcs.anl.gov >>>> Subject: Re: [AG-TECH] BlackMagic HDMI vic beta download >>>> >>>> Hi Jimmy, >>>> >>>> Did you try checking the HDMI input directly, via either >>>> Blackmagic Media Express or AMCap? If that works then we >>>> probably have the same problem - I can see the video fine in >>>> Media Express but vic just shows a black screen with any codec >>>> or size. Here we have the Blackmagic Intensity Pro cards with >>>> Sony HDR-SR11 cameras, which are AVCHD. Side note: I don't >>>> think the recording format makes much of a difference, just the >>>> specific video format, as in 1080i at a certain framerate. >>>> >>>> Nathan, is vic expecting a certain framerate? The format that >>>> worked with Media Express was 1080i @ 59.97. If it's only been >>>> tested with PAL so far, I would hazard a guess and say that the >>>> NTSC isn't using the right format/framerate in some way. >>>> >>>> --Andrew >>>> >>>> 2009/2/17 Jimmy Miklavcic <jimmy.miklav...@utah.edu> >>>> >>>> Mike, it's great news that you have been able to get HIT Lab's vic to >>>> work. I haven't been so lucky. I have AVCHD (Panasonic AG-HMC150) video >>>> cameras. Mike I think that you have MPEG2 based HD cameras. Are yours >>>> Sony? Nathan, I don't think you tested with an AVCHD camera. >>>> >>>> All I get is black, which I think tells me that it sees the video card >>>> but not, the video stream. Mike, did you use 1080i/p or 720p? >>>> >>>> If anyone has any suggestions, I'm open. >>>> >>>> Jimmy >>>> >>>> >>>> -- >>>> Jimmy Miklavcic >>>> Multimedia Specialist >>>> jimmy.miklav...@utah.edu >>>> >>>> UNIVERSITY OF UTAH >>>> CTR FOR HIGH PERFORM COMPUTING >>>> 155 SOUTH 1452 EAST RM 405 >>>> SALT LAKE CITY, UT 84112-0190 >>>> >>>> Office: 801.585.9335 >>>> Fax: 801.585.5366 >>>> >>>> http://www.anotherlanguage.org >>>> >>>> >>>> -----Original Message----- >>>> From: ag-tech-boun...@lists.mcs.anl.gov >>>> [mailto:ag-tech-boun...@lists.mcs.anl.gov] On Behalf Of >>>> mike.w.da...@cs.cardiff.ac.uk >>>> Sent: Tuesday, February 17, 2009 1:52 AM >>>> To: Nathan Gardiner >>>> Cc: ag-t...@mcs.anl.gov; mike.w.da...@cs.cardiff.ac.uk >>>> Subject: Re: [AG-TECH] BlackMagic HDMI vic beta download >>>> >>>> Hi Nathan >>>> Thanks otherwise all looking good. >>>> Not bad on bandwidth usage either. >>>> Mike >>>> >>>> >> >> >> >> Michael Daley M.Phil MBCS GCFA >> >> ---------------------------------------------------------------- >> This message was sent using IMP, the Internet Messaging Program. >> >> > > > -- > ------------------------- > Gurcharan S. Khanna, Ph.D. > Director of Research Computing > Office of the Vice President for Research > http://rc.rit.edu > > Assistant Research Professor, Ph.D. Program > Golisano College of Computing and Information Sciences > http://people.rit.edu/gskpop > > Director, Interactive Collaboration Environments Laboratory, > Center for the Advancing the Study of Cyberinfrastructure > http://icelab.rit.edu > --- > Rochester Institute of Technology > 1 Lomb Memorial Drive > Rochester, New York 14623-5603 > Phone: 585-475-7504 ~ Cell: 585-451-8370 > Email: gurcharan.kha...@rit.edu Michael Daley M.Phil MBCS GCFA ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
