hi, we have an AG site in Kosovo at the American University of Kosovo, and they only have a 12 Mbps connection to the outside. the mix of H.261 and H.264 streams in the RIT venue is too much of a drain on their capacity for a 24/7 load. also, no multicast, so they must use a bridge.
is there any way to: 1) configure a bridge to distinguish between H.261 and H.264 to send one but not the other? or 2) apparently, if vic sends to a bridge, it also receives whether or not you have a consumer service running. is there any way to send a stream but have the bridge not send back any streams? thanks, -gurcharan -- ------------------------- Gurcharan S. Khanna, Ph.D. Director of Research Computing Office of the Vice President for Research http://rc.rit.edu Assistant Research Professor, Ph.D. Program Golisano College of Computing and Information Sciences http://people.rit.edu/gskpop Founding Director, Interactive Collaboration Environments Laboratory Center for Advancing the Study of Cyberinfrastructure http://icelab.rit.edu --- Rochester Institute of Technology IT Collaboratory Bldg. 17, Room 3119 Rochester, New York 14623-5603 Phone: 585-475-7504 ~ Cell: 585-451-8370 Email: [email protected]
