Hi Doug, ChangHyeok Bae from Korea is here at the HIT Lab for the next 2-3 months working on getting the BlackMagic card working in Access Grid under windows.
It would be great to have you both get in contact to discuss the BlackMagic card. His email address is: [email protected] Regards, ------------------------------------------------------------------------ - Nathan Gardiner Human Interface Technology Lab NZ (HIT Lab NZ) Room 110, Old Maths Building, University of Canterbury DDI: +64 3 364 3072, Cell: +64 21 163 2956 Calendar Information -----Original Message----- From: Douglas Kosovic [mailto:[email protected]] Sent: Friday, 16 January 2009 2:17 p.m. To: Nathan Gardiner; Jimmy Miklavcic Cc: [email protected] Subject: RE: [AG-TECH] AVCHD and AG Hi Nathan I was adding generic support for more pixelformats in VIC's DirectShow grabber, with a preference for YUV420 if supported natively by the capture hardware. Setting the DirectShow SampleGrabber to YUV420 and then using DirectShow's "Intelligent Connect" mechanism causes the Blackmagic filter to get set to YUV420 720x486 (and that's 486, not 480 which is strange). So looks like adding proper Blackmagic Intensity card support requires explicit programmatic support of the Intensity DirectShow filter, maybe interrogating it and listing inputs/formats in the input menu of VIC (e.g. "HDMI 29.97 fps 1080i", "HDMI 25 fps 1080i", ..., "Analog YCbCr 480i", etc). If you guys are coding for the Blackmagic Intensity be my guest, it'll be wasted effort if we both do it. One of the other changes I did was add support for remote DirectShow filter graph connection with GraphEdit (found in Microsoft's Platform SDK). A screendump of GraphEdit remote filter graph connection to VIC, involving the Intensity Pro: http://www.vislab.uq.edu.au/ag3/windows/graphedit.png GraphEdit is very useful for seeing the properties (pixelforms, resolution, etc) of the filters and pins. Cheers, Doug > -----Original Message----- > From: Nathan Gardiner [mailto:[email protected]] > Sent: Thursday, 15 January 2009 6:05 AM > To: Douglas Kosovic; Jimmy Miklavcic > Cc: [email protected] > Subject: RE: [AG-TECH] AVCHD and AG > > Hi there, > > We are starting to code for the HDMI Intensity card into AccessGrid for > a Windows version and should have something within the next couple of > months. > > > > Regards, > > ----------------------------------------------------------------------- > - > - > Nathan Gardiner > Human Interface Technology Lab NZ (HIT Lab NZ) > Room 110, Old Maths Building, University of Canterbury > DDI: +64 3 364 3072, Cell: +64 21 163 2956 > > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Douglas Kosovic > Sent: Wednesday, 14 January 2009 10:46 a.m. > To: Jimmy Miklavcic > Cc: [email protected] > Subject: Re: [AG-TECH] AVCHD and AG > > Hi Jimmy, > > > Is anyone using AVCHD, HDMI and the intensity pro cards with AG on a > > windows XP box, or something close to this combination? > > The Intensity Pro outputs Blackmagic HDYC (YUV 4:2:2) pixel format that > isn't supported by VIC's DirectShow grabber at the moment. It doesn't > matter if a AVCHD or a DV/HDV camcorder is used with the HDMI. > > I'm currently in the process of adding multiple YUV formats support to > VIC's DirectShow grabber (which so far has fixed a white vertical line > issue with 480i DV over firewire). Maybe in the next couple of weeks > it'll work with the Blagmagic Intensity Pro. > > > Cheers, > Doug
