On 01/02/2008, at 1:09 PM, Nathan Gardiner wrote: > Hi Doug / Chris, > > We've just realised as of yesterday that the Access Grid 2.4 > Developers CA certificate has expired which means that our server > is unable to work. We were planning on moving to 3.1 anyway so this > is a good time to do it, but thought I would just mention it to you > both to see if you are still running a 2.4 venue server and if you > are experiencing those issues as well.
Nathan, Thanks for the tip off - we found the same problem but felt we had to find a fix rather than shut it down at short notice. We fixed the problem by installing a new CA cert from AG3.1 (whose CA cert expires in 2012). I copied 45cc9e80.0 and 45cc9e80.signing_policy from /etc/AccessGrid3/Config/CAcerts of a newly installed 3.1 system into /etc/AccessGrid/Config/CAcerts/ of the AG2 server. I also had to copy them into ~/.AccessGrid/Config/ trustedCACerts directory of the user which the server runs as. I then ran certmgr.py to remove the old CA cert. chris > From: ag-tech...@googlegroups.com [mailto:AG-Tech- > n...@googlegroups.com] On Behalf Of Nathan Gardiner > Sent: Friday, 1 February 2008 3:08 p.m. > To: ag-tech...@googlegroups.com > Subject: [AGNZ-Tech] Access Grid 2.4 Venue Server > > Hi all, > > Some of you may have noticed today that the 2.4 Venue Server is not > allowing you to log into it. After scratching my head for an hour > or so and with the help of Graeme Glen trying to figure out why it > wasn't working as well, we both realised that the Access Grid > Developers CA certificate was only valid to 31/01/2008 and had > therefore expired. > > This basically means that unless the Access Grid developers team > decide to release an updated 2.4 version or a new certificate, then > the Venue Server will not be able to operate. With the developers > now releasing Access Grid 3.1 I can't see that they will be looking > at updating the older 2.4 certificate. > > So with this being the case and beyond our control, I would > encourage everyone in New Zealand to upgrade to 3.1 as soon as > possible as this is the only way forward. I have updated the > installation package to the latest version. It is available for > download here: > > http://avcc.karen.net.nz/wiki/Downloads > > > > Also with this event happening, we will now retire the Access Grid > 2.4 Venue Server and Bridge Server effective immediately. Please > email nathan.gardi...@canterbury.ac.nz if you have any queries. > Apologies again for this but as you can see, it was completely out > of our control. > > > > Regards, > ---------------------------------------------------------------------- > --- > Nathan Gardiner > Human Interface Technology Lab NZ (HIT Lab NZ) > Room 110, Old Maths Building, University of Canterbury > DDI: +64 3 364 3072, Cell: +64 21 163 2956 > > > > --~--~---------~--~----~------------~-------~--~----~ > You received this message because you are subscribed to the "Access > Grid NZ Tech" group. > To post to this group, send email to ag-tech...@googlegroups.com > To unsubscribe from this group, send email to AG-Tech-NZ- > unsubscr...@googlegroups.com > For more options, visit this group at http://groups.google.com/ > group/AG-Tech-NZ?hl=en > -~----------~----~----~----~------~----~------~--~--- > Christoph Willing +61 7 3365 8350 QCIF Access Grid Manager University of Queensland