Todd Zimmerman wrote: > Douglas Kosovic wrote: >> You could try the vic-2.8ucl1.3.0-0.1.20070816svn.el5 RPM instead. I >> built some i386 RHEL5/CentOS5 AG RPMs a few days ago: >> http://www.vislab.uq.edu.au/accessgrid3/centos/ >> or the symlink: >> http://www.vislab.uq.edu.au/accessgrid3/rhel/ >> >> 'dmesg' might give some indication of what's going on. >> > > New EL vic has same behaviour - no messages in dmesg. > > Didn't update the entire AG (just Vic) due to conflicts with epel and some > installed software - but, > same behavior when running multiple vics manually. > >> On RHEL5, try installing a kernel-2.6.22 RPM from Fedora Core6 updates >> and see if you get the same symptoms with the V4L that comes with the >> newer kernel. > > May just go to Fedora - and will email if problem still exists. > > Thanks, > > Todd >
This problem still exists on Fedora for me (AG3.1b2). It exists on multiple computers; however.... Am I the only person experiencing this? Symptoms are: Multiple video producers on Fedora and/or Redhat. When I join a room, the proper device and port are selected; however on some of the producers (not consistent... sometimes one, sometimes two etc) it is just blue output. When I hit 'Menu' and reselect the port (not even deselect - just reselct) the camera source properly shows up. Further, on many of these capture cards (bttv based Impact VCB) I have to select the Television input when in fact I'm using one of the Composite inputs.... Thoughts? Todd
