Hi Tom The network configuration for this test was as follows: The node running 3.0.2 was running over a multicast enabled network.
The other two machines running 3.1 beta were both on a separate UNICAST only network but using AG Connector via the UMTP/GIST bridge so I guess it may be a fault with AG Connector. We will try some other configurations and see what happens. Thanks Mike Thomas D. Uram wrote: > Hi Mike: > > We're committed to compatibility between 3.x versions. I haven't > encountered any problem like you describe that was explained by > software. Are you able to isolate it to some other cause, such as > networking? Can you reliably reproduce the problem in different > network environments? > > Tom > > > On 8/15/07 3:53 PM, mike.w.da...@cs.cardiff.ac.uk wrote: >> Hi All >> I've not been paying attention lately to the community but now have a >> bit of time spare. >> Could anyone varify if there are any compatability problems between >> AG3.0.2 and AG 3.1 beta. >> We were doing a few tests today between three sites, two were running >> AG3.1 and the other was running 3.0.2 all pointing to Argonne lobby >> the two 3.1 sites could see existing feeds in the Lobby plus feeds >> from the other 3.1 site but not the 3.0 feeds. The node running 3.0.2 >> could only see its own feeds plus the lobby feeds not the feeds from >> 3.1 nodes. >> All three machines were running Windows XP. >> Any ideas :-) >> Mike >> >> ---------------------------------------------------------------- >> This message was sent using IMP, the Internet Messaging Program. >> >> >> > >
