Ye: A build of the UCL vic for Intel Macs can be found here:
http://www.mcs.anl.gov/~turam/vic-ucl-2007Jun It has the patch to try to match the source and destination ports that you were interested in. Tom On 6/21/07 11:22 AM, Ye Wang wrote: > Fred, > > We were looking for a "new" vic package on intel mac for the setup at > UCSF. There's a firewall issue and the vic comes with ag apckage did > not work at one site at UCSF. I am wondering if you have the vic > package available to share with us. Is there an instruction on how to > build vic on mac? > > Cheers, > > Ye > > Fred Dech wrote: >> Jeremy, >> >> i was finally able to install a vic that behaved well on intel macs >> during >> bridging (i think the problem there had to do with the incoming ports >> alway >> being different from the outgoing port). it Is the SUMOVER vic, but >> it wasn't >> quite obvious, to me anyway, which version was the most recent. with >> Eric >> Olson's help i zeroed in on the mpeg4/vic at SUMOVER, which is >> mpeg4 vic 2.8 ucl version 1.3.0. that version did the trick for me. >> i'd >> easily found version 1.2.0. that one did not work well on my >> system. check >> your vic version, maybe you don't have their most recent one. >> >> --fred >> >> On Mon, Jun 18, 2007 at 02:39PM, Jeremy Mann wrote: >>> Is there a patch or patched version of VIC to cope with the random >>> incoming port issue that was discussed at the Retreat? I've tried >>> SUMOVERs and the one from VISLAB. I think I remember reading a thread >>> that this was fixed in a Windows version of VIC. >>> >>> --- >>> Jeremy Mann >>> UT Health Science Center at San Antonio >>> Bioinformatics Core Facility >>> (210) 567-2672 >> > >
