Sam, Just a note for reference. Apparently RAT doesn't support the Realtek ALC650 sound card either, at least not very well. RAT does recognize the card but will not run for more than a short period of time without crashing. So if you're looking at a new system you may want something without the Realtek card.
George At 03:35 PM 1/11/2007 +0800, Morris Lin wrote: >Hi Sam, > In my experience, RAT doesn't support some sound cards. (ex: Reltek High > Definition Card). You can use another sound card, and try it again. > >Morris > >Sam Gundry wrote: >>Hi, >> >>Audio is not quite working. (Video is working fine, yay!) >> >>That is, when I enter a room, RAT is launched fine. Also, if there is someone >>talking in the venue, my listening slider moves up and down, but no sound is >>output. I have tested my audio independent of AG and it is working correctly. >> >>I think the problem is in Options -> category Audio -> Audio Device. The only >>option is "No Audio Device". >> >>Apparently, from the RAT manual, "No Audio Device" appears only when another >>process is using the audio device. Although, after closing all >>programs/process that might be using the audio device, I still haven't had >>any success. >> >>Has anyone experienced anything similar to this? >>Are there any suggestions? >> >>Also, I am using the Audio Reflector accessed from Venue on APAG's Services >>Lobby. However, when I enter the room, the AudioReflector doesn't appear - as >>suggested it should here: http://www.accessgrid.org/node/354 >> >>Is the Audio Reflector room working properly? FYI, I am using AG 3 and >>logging into the appropriate APAG Lobby (vv3.ap-accessgrid.org). >> >>Thanks for any help, >> >>Sam >> >> >> >
