The problem i had in windows is that at the third venue change.. the device appears busy... and i have to restart the computer to get it to work again. I havent been able to solve it so far (same problem under Windows 2000 and WindowsXP) :|
Mike Daley escribió: > We have tried to use this card under LINUX but as you say the device > appears but the card does not work. Winnov do not support LINUX. There > is one site with a driver but this does not work either with this card. > > We finally got winnov 4400 working properly under XP. I'll try and dig > out the details. > I believe it was info from one of the Australian guys and possible > Cindy at Los Alamos that had a solution for windows. > Hope this is helpful > Mike > > > Natalia Costas wrote: > >> >> >> Hi everybody, >> >> I am still having trouble with the winnov under Windows. As i think >> it is 878 chip based i tried it under Linux, and the bttv module >> loads, but it doesnt appear the /dev/video0 (neither 1,2, 3). So .. >> it seems to me it doesnt work... >> >> Has anyone tried that before and got any conclusion? Any linux guru >> willing to develop a driver for it?? >> >> Thanx a lot in advance. >> Kind regards, >> > > -- ==================================================== Natalia Costas Lago Técnico de Comunicaciones - Dpto. de Comunicaciones Centro de Supercomputacion de Galicia (CESGA) Avenida de Vigo, s/n (Campus Sur) 15705 Santiago de Compostela - SPAIN E-mail: nata...@cesga.es Tel: +34 981 56 98 10 (ext. 237) Fax: +34 981 59 46 16 Web: http://www.cesga.es/ ====================================================