Hi, On suse 10.1 I have the same results as you. Can only get cameras 1 and 2 working. Cameras 3 and 4 are just a blue screen. Sometimes I can physically swap the video cables from camera 1 and 3 and then get 1,2, and 3 working.
Any one have a fix for this? Thanks Rene > > I too am having problems with Osprey and Suse10.1, having moved from FC2 > (which worked without a flaw) > > I can get output from 2 of the cards, however the other two cards > produce the plain blue screen output, this is when using bot AG > software, xawtv, and gnomemeeting. > > Any advice please ? > > Cheers > > Stuart > > On Thu, 2006-08-24 at 15:20 -0500, Rene Salmon wrote: >> Hi list, >> >> We have some osprey 230 cards on a suse 10.1 box. All the bttv drivers >> load fine out of the box from suse. >> >> The problem is that when I startup the AG toolkit software all I get is >> a blue screen. I had the same problem in windows and all I did was >> start up the viewcast sotware and tell it it use the s-video input and >> everything worked. >> >> I tried using the VIC to select s-video but that does not seem to work I >> still get a blue screen. Is there a way to tell the kernel via a module >> option to use the s-video input on the cards? >> >> thanks. >> >> Rene >>
