http://configure.us.dell.com/dellstore/config.aspx?c=us&cs=19&l=en&oc=DXPS600F4&s=dhs
it has two of dual 512mb nvidia Geoforce NVD700D video cards and uses a Videum Winnov card that provides 4 camera inputs. We're using some wall mounted cameras - I think they're pansonic or sony . Breuer, Roman wrote: Bob, Can you tell me, which mainboard, cams and videocard are you using? Roman --------------------------------------- Dipl.-Inform. Roman Breuer Multimedia und Video Rechen- und Kommunikationszentrum der RWTH Aachen Seffenter Weg 23 52074 Aachen Germany Tel.: +49 (0) 241 / 80 29247 Fax: +49 (0) 241 / 80 6 29247 Web: http://www.rz.rwth-aachen.de -----Original Message----- From: owner-ag-t...@mcs.anl.gov<mailto:owner-ag-t...@mcs.anl.gov> [mailto:owner-ag-t...@mcs.anl.gov] On Behalf Of Bob Riddle Sent: Wednesday, May 17, 2006 7:31 PM To: Nathan P Johnson Cc: ag-t...@mcs.anl.gov<mailto:ag-t...@mcs.anl.gov> Subject: Re: [AG-TECH] Hardware concern ... We have been running 1-PC node(s) for several years. The PC has 3 projectors attached, 4 camera's, and a Gentner. We're using a Dell XPS workstation with 2 dual core 2.4 ghz processors. No complaints. Nathan P Johnson wrote: Hi everyone: We are thinking of converting our three-PC full room node ( three projectors, AP 400 etc. ) to a single PC design, possibly using a PC setup from INSORS. Has anyone set up a room node with three projectors and everything running on a single PC? If so what has the experience been during large conferences when there are a large number of incoming video streams and so on. Thanks in advance for your help. Nate Nathan Johnson sysAdmin Dahlem Supercomputer Lab Speed Scientific School University of Louisville (502) 852-0164 nathan.john...@louisville.edu<mailto:nathan.john...@louisville.edu>
