Update, I used the FC4 i386 rpm for RAT. Installed just fine.
Douglas Kosovic said: > On Tue, 2006-04-11 at 13:51 -0500, Jeremy Mann wrote: >> Great! Thanks Douglas. Is there a proper order to compile these in? > >> > I now use real SRPMs to build everything and the SRPMs can be found >> here: >> > http://www.vislab.uq.edu.au/accessgrid3/fedora/ >> > > >> > if you want to build compat-AccessGrid-2.4 on Suse, grab the >> folllowing >> > SRPMs: >> > AccessGrid-rat >> > AccessGrid-vic >> > QuickBridge >> > compat-AccessGrid-2.4 >> > globus-accessgrid >> > pyOpenSSL_AG >> > python-SOAPpy >> > python-fpconst >> > then rpmbuild --rebuild them. > > I should have added pyGlobus to the above list. > > compat-AccessGrid-2.4 needs to be built and installed last. pyGlobus > after globus-accessgrid and python-SOAPpy after python-fpconst. > > I wouldn't worry too much about the build order as the BuildRequires in > the spec files will let you know if a build dependency isn't getting > satisfied when you try to rpmbuild each of the RPMs. > > I should also mention that AccessGrid-rat-4.2.22-*cvs*.src.rpm (i.e. ANL > CVS rat) can only be built as a 32bit RPM, it might be able to be built > by setting the rpmbuild --target arch argument to i586 (or however 32bit > RPMs get built on Suse x86-64). If it doesn't want to get built as > 32bit, you may need to build rat on a 32bit Suse instead. > > There is also a 64bit clean > AccessGrid-rat-4.2.22-20051206darcs.*.src.rpm (i.e from Steve Smiths > darcs repository) which would build as either 32bit or 64bit. The 32bit > built rat seems to have less glitches than the 64bit. > > > Cheers, > Doug. > -- Jeremy Mann jer...@biochem.uthscsa.edu University of Texas Health Science Center Bioinformatics Core Facility http://www.bioinformatics.uthscsa.edu Phone: (210) 567-2672
